Bedienungsanleitung Yamaha GX900 (Seite 43 von 61) (Englisch)

29934

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

E-35

English

Recording to MD

Track-marking

The MD recorder provides both automatic and manual

methods for the track number-marking.

● Automatic (default setting)

When making a recording, the track-marking is made

automatically.

● Manual

To make the track-marking manually, press M-MARK on

the remote control repeatedly until “MANUAL” (

8) is

illuminated.

When recording analog signals (from tapes, radio

programs, etc.)

Automatic:

Track numbers are written in synchronization with the input

level of the signal being recorded. During recording, if no

sound is detected for more than 1.5 seconds, the recorder

interprets this to be a gap between two tracks. When the

source signal is detected again, a track number is

automatically written.

Manual:

One track number is written automatically when you start

recording, but none are written during recording. To mark a

track number, press M-MARK at the desired position while

recording.

Note

When using the manual method, the marks must be set at

least 4 seconds apart.

When recording digital signals (from CDs, etc.)

Track numbers are written in the same positions as the

original source (CDs, etc.) with either automatic or manual

track-marking method.

To add additional track numbers, select the manual

track-marking method and press M-MARK at the desired

position while recording.

Monaural recording

Recording in monaural (mono) allows you to record up to 148

minutes of sound on one 74 minute MD. This may be useful

when recording a long interview, debate, or other long time

sources on one disc.

1 Select the proper input mode by pressing INPUT MODE.

When recording a CD source or the source connected

to the DIGITAL IN terminal on the rear of the main unit.

Select the Digital Mono mode so that “DIGITAL MONO”

(7) lights up on the display.

When recording other sources

Select the Analog Mono mode so that “MONO” (

7) lights

up on the display.

2 Follow the procedure of “Basic recording” on page 34.

A B C D E F G H I J K L M N O

P Q R S T U V W X Y Z

R. T I ME

EDIT

MODE REPEAT

RANDOM

SPACE

TUNER

DISC SKIP

POWER SLEEP

INPUT

VOLUME

9 0

PRESET

TIME

PROG

YMERSION BASS BOOST

MUSIC

INPUT MODE M–MARK SCROLL

TAPE

REC/PAUSE

ENTER

DELETE

REC/PAUSE

DIRECTION

MD EDIT

M-MARK

Notes about TOC

TOC (Table of Contents) is the non-audio data contained on

all minidiscs (track numbers, play time, title data, etc.)

When you make recording onto an MD, the TOC data is

automatically renewed.

When the message “TOC Reading” or “TOC Writing”, etc. is

shown on the display, it means that the MD recorder is

reading the TOC data on an MD, or recording TOC data onto

an MD. During this period, do not make an operation on the

MD recorder, do not disconnect the power cord of this

system, or do not shake this system to prevent a

misoperation of the MD recorder.

INPUT MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha GX900 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info