Bedienungsanleitung Yamaha HTR-2866 (Seite 46 von 73) (Englisch)

549944

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 46

Speaker

Configures the speaker settings manually.

■ Configuration

Configures the output characteristics of the speakers.

• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm

(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).

❑ Subwoofer

Selects whether or not a subwoofer is connected.

Settings

❑ Front

Selects the size of the front speakers.

Settings

• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.

❑ Center

Selects whether or not a center speaker is connected and its size.

Settings

❑ Surround

Selects whether or not surround speakers are connected and their sizes.

Settings

❑ Crossover

Sets the lower limit of the low-frequency components that can be output from a speaker

whose size is set to “Small”. A frequency sound lower than the specified value will be

produced from the subwoofer or front speakers

Settings

40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100H z, 110 Hz, 120 Hz, 160 Hz, 200 Hz

• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and

crossover frequency to maximum.

Use (default)

Select this option when a subwoofer is connected.

The subwoofer will produce LFE (low-frequency effect) channel audio

and low-frequency components from other channels.

None

Select this option when no subwoofer is connected.

The front speakers will produce LFE (low-frequency effect) channel

audio and low-frequency components from other channels.

Small (default)

Select this option for small speakers.

The subwoofer will produce front channel low-frequency components

(configurable in “Crossover”).

Large

Select this option for large speakers.

The front speakers will produce all of the front channel frequency

components.

Setup

Speaker

HDMI

Sound

ECO

Function

Language

Configuration

Distance

Level

Equalizer

Test Tone

Small (default)

Select this option for small speakers.

The subwoofer or front speakers will produce center channel

low-frequency components (configurable in “Crossover”).

Large

Select this option for large speakers.

The center speaker will produce all of the center channel frequency

components.

None

Select this option when no center speaker is connected.

The front speakers will produce center channel audio.

Small (default)

Select this option for small speakers.

The subwoofer or front speakers will produce surround channel

low-frequency components (configurable in “Crossover”).

Large

Select this option for large speakers.

The surround speakers will produce all of the surround channel

frequency components.

None

Select this option when no surround speakers are connected.

The front speakers will produce surround channel audio. Virtual

CINEMA DSP works when you select a sound program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha HTR-2866 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha HTR-2866

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info