516962
52
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
En 52
SETUP
Setting sound field program parameters
Parameters usable in certain sound field
programs
2ch Stereo only
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
5ch Stereo only
Adjusts the center channel volume. J1
Adjusts the volume of the surround L channel. J1
Adjusts the volume of the surround R channel. J1
Straight Enhancer/5ch Enhancer only
Adjusts the effect level of the compressed music enhancer mode.
Parameters usable in surround decoder
q PLII Music only
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
When Neo:6 Music is selected
Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as
necessary.
Direct
Auto (Default) Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of “Bass” and
“Treble” are set to 0dB.
Off Does not bypass the DSP circuit and tone control
circuit.
CT Level
Adjustable range 0 to 100%
Default setting 100%
SL Level
Adjustable range 0 to 100%
Default setting 100%
SR Level
Adjustable range 0 to 100%
Default setting 100%
EFCT LVL
High (Default) Standard effect.
Low Sets when the high-frequency signals of the source are
emphasized excessively.
Panorama
Off (Default) Disables the effect.
On Enables the effect.
CT Width
Adjustable range 0 to 7
Default setting 3
Dimension
Adjustable range -3 to +3
Default setting 0
C.Image
Adjustable range 0.0 to 1.0
Default setting 0.3
J
1 : Not displayed when speakers are set to be inactive.
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yamaha-htr-3064

Suche zurücksetzen

  • Hallo, kann ich ohne Fernbedienung den AV4 zum HDMI 2 zuweisen, da mein PC nur Stereo kann , aber über ne externe Soundkarte kann er mit optischem Anschluss in AV1 oder AV 4 rein.
    Gruß
    Manfred Eingereicht am 12-11-2018 02:40

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha HTR-3064 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha HTR-3064

Yamaha HTR-3064 Kurzanleitung - Deutsch - 8 seiten

Yamaha HTR-3064 Bedienungsanleitung - Deutsch - 68 seiten

Yamaha HTR-3064 Kurzanleitung - Englisch - 8 seiten

Yamaha HTR-3064 Kurzanleitung - Holländisch - 8 seiten

Yamaha HTR-3064 Bedienungsanleitung - Holländisch - 68 seiten

Yamaha HTR-3064 Bedienungsanleitung - Französisch - 68 seiten

Yamaha HTR-3064 Kurzanleitung - Französisch - 8 seiten

Yamaha HTR-3064 Bedienungsanleitung - Italienisch - 68 seiten

Yamaha HTR-3064 Kurzanleitung - Italienisch - 8 seiten

Yamaha HTR-3064 Bedienungsanleitung - Spanisch - 68 seiten

Yamaha HTR-3064 Kurzanleitung - Spanisch - 8 seiten

Yamaha HTR-3064 Kurzanleitung - Schwedisch - 8 seiten

Yamaha HTR-3064 Bedienungsanleitung - Schwedisch - 68 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info