Bedienungsanleitung Yamaha HTR-3072 (Seite 53 von 112) (Englisch)

699813

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Option menu items

Use the following table to configure playback settings of the unit.

Note

▪ Available items vary depending on the selected input source.

▪ Text in parentheses denotes indicators on the front display.

Item Function Page

Input Select (

Input Select)

Switches the input source. p.53

Tone Control (

Tone Control)

Adjusts the level of high-frequency range and low-

frequency range individually.

p.53

DSP/Surround

(DSP/

Surround)

Program (PRG)

Select the sound programs and stereo playback. p.54

Sur.Decode

(SrDec)

Select which surround decoder is used when

Sur.Decode

is selected as the program.

p.55

DSP Level

(DSP Level)

Adjusts the sound field effect level. p.56

Adaptive DRC

(A.DRC)

Sets whether the dynamic range (from maximum to

minimum) is automatically adjusted to the volume.

p.56

Enhancer

(Enhancer)

Enables/disables Compressed Music Enhancer. p.56

Volume Trim

(Volume Trim)

Input Trim

(In.Trim)

Corrects volume differences between input sources. p.56

Subwoofer Trim

(SW.Trim)

Fine-adjusts the subwoofer volume. p.56

Lipsync (Lipsync)

Enables/disables the “Lipsync” setting in the “Setup”

menu.

p.57

Signal Information (Signal Info.)

Displays information about the video/audio signals. p.57

Audio In

(Audio In)

Combines the video of the selected input source with

the audio of a different input source.

p.57

Video Out

(Video Out)

Selects a video source to be output together with the

selected audio source.

FM Mode (FM Mode)

Switches between “Stereo” and “Monaural” for FM

radio reception.

p.59

Preset (Preset)

Auto Preset

(AUTO)

Automatically registers FM radio stations with strong

signals as presets.

p.59

Clear Preset

(CLEAR)

Clear radio stations registered to preset numbers. p.60

Traffic Program

(TrafficProgram)

(U.K., Europe and Russia models only)

Automatically searches for a traffic information

station.

p.60

Repeat

(Repeat)

Configures the repeat setting. p.61

Item Function Page

Pairing

(Pairing)

Performs a pairing operation between the unit and

your Bluetooth device.

Connect/Disconnect (Connect/

Disconnect)

Connects/disconnects the Bluetooth device. p.62

Input Interlock (Interlock)

Sets whether the input source automatically switches

to "Bluetooth

" when a Bluetooth connection is

established.

p.63

Switching the input source

Switches the input source. Press ENTER to switch to the selected input source.

Option menu

“Input Select”

Adjusting the tone of the audio output

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)

individually.

Option menu

“Tone Control”

Choices

Treble, Bass

Setting range

-6.0 dB to +6.0 dB (0.5 dB increments)

Note

▪ When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.

▪ You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or

“Bass”, then press PROGRAM to make an adjustment.

▪ If you set an extreme value, sounds may not match those from other channels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha HTR-3072 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha HTR-3072

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info