Bedienungsanleitung Yamaha HTR-5065 (Seite 19 von 108) (Englisch)

652590

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

PREPARATIONS ➤ Connecting a TV En 19

❑ Necessary settings

To use HDMI Control and ARC, you need to configure the following settings.

For details on settings and operating your TV, refer to the instruction manual for the TV.

After connecting external devices (such as a TV and playback devices)

and the power cable to the unit, turn on the unit, TV, and playback devices.

Configure the settings of the unit.

a Check that ARC is enabled on the TV.

b Switch the TV input to display video from the unit.

c Press SETUP.

d Use the cursor keys to select “HDMI” and press ENTER.

e Press ENTER again.

f Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to

select “On” as shown below.

g Press SETUP.

Configure the settings for HDMI Control.

a Enable HDMI Control on the TV and playback devices (such as HDMI

Control-compatible BD/DVD player).

b Turn off the TV’s main power and then turn off the unit and playback devices.

c Turn on the unit and playback devices and then turn on the TV’s main power.

d Switch the TV input to display video from the unit.

e Check the following.

On the unit: The input to which the playback device is connected is selected. If not,

select the input source manually.

On the TV: The video from the playback device is displayed.

f Check that the unit is properly synchronized with the TV by turning off the TV or

adjusting the TV volume with the TV remote control.

This completes the necessary settings.

If you select a TV program with the TV remote control, the input source of the unit will be

automatically switched to “AV 4” and the TV audio will be played back on the unit.

If you cannot hear the TV’s audio, check that “ARC” (p.73) in the “Setup” menu is set to

“On”.

• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)

the devices. It may solve the problem.

• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on

the TV.

• If the audio is interrupted while using ARC, set “ARC” (p.73) in the “Setup” menu to “Off” and use a digital

optical cable to input TV audio to the unit (p.20).

• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks,

use “TV Audio Input” (p.72) in the “Setup” menu to change the TV audio input assignment. To use the

SCENE function (p.35), you also need to change the input assignment for SCENE(TV).

RETURN

VOLUME

ENTER

TOP

POP UP

DISPLAY

OPTION

SETUP

RETURN

UME

POP UP

DISP

PTI

SETUP

Cursor keys

ENTER

Setup

Speaker

HDMI

Sound

ECO

Function

Network

Language

Configuration

HDMI Control

Audio Output

Standby Through

TV Audio Input

Standby Sync

ARC

SCENE

Auto

AV4

Auto

Back: RETURN

1 2 3

TV connection

4 5 6 7 8 9 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha HTR-5065 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha HTR-5065

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info