Bedienungsanleitung Yamaha HTR-5130 (Seite 28 von 42) (Englisch)

549945

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

AUTOMATIC PRESET TUNING

You can also make use of an automatic preset tuning function for FM stations only. With this function, this unit performs automatic

tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the

manual preset tuning method on page 27.

HTR-5130RDS only Automatic preset tuning stores only RDS stations. Refer to pages 30 to 34 for details on RDS stations.

To store stations

To tune to higher frequencies, press right side once.

To tune to lower frequencies, press left side once.

* If the TUNING button is not pressed for a while, automatic

preset tuning begins automatically toward higher

frequencies.

Automatic preset tuning begins from the frequency currently

displayed. Received stations are programmed to A1, A2 ...

A8 sequentially.

* If more than 8 stations are received, they are programmed

to the preset station numbers in other groups in

alphabetical order.

If you want to store the first station received by the

automatic preset tuning to a desired preset station

number.

If, for example, you want to store the first received station to

C5, select “C5” by using the A/B/C/D/E button and the preset

station number selector buttons after pressing the MEMORY

button in step 2. Then press the TUNING button. The first

received station is stored to C5, and next stations to C6, C7 ...

sequentially.

If stations are stored up to E8, the automatic preset tuning is

automatically concluded.

Press and hold for

more than 3 seconds.

MAN'L

AUTO FM

MEMORY

PRESET

MEMORY

AUTO

Flashes.

DOWN UP

TUNING

When the automatic preset tuning concludes

The display shows the frequency of the last preset station.

Check the contents and the number of preset stations by

following the procedure of the section “To recall a preset

station” on page 27.

To recall a preset station

Follow the procedure in the section “To recall a preset station”

on page 27.

* HTR-5130RDS only A recalled station is shown by the

frequency or station name in the display.

* HTR-5130 only A recalled station is shown by the

frequency in the display.

Notes

● You can replace a preset station with another FM or AM

station manually by following the procedure in the section

“To store stations” on page 27.

● If the number of received stations is not enough to be stored

up to E8, the search is finished automatically after searching

all frequencies.

● With this function, only stations with sufficient signal strength

are stored automatically. If the station you want to program

is weak in signal strength, tune to it in monaural manually

and program it by following the procedure in the section “To

store stations” on page 27.

HTR-5130RDS only There may be a case that this

function cannot receive a station which could be received

by the automatic tuning method. This is because this

function receives a large volume of PI (Program

Identification) data along with the station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha HTR-5130 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info