Bedienungsanleitung Yamaha HTR-5130 (Seite 32 von 42) (Englisch)

549945

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Changing the RDS modes

When an RDS station is received, “PS”, “PTY”, “RT” and/or “CT” that correspond to the RDS data services employed by the station

light up in the display. By pressing the RDS MODE/FREQ button once or more, you can change the display mode among the RDS

modes employed by the received station in the order shown below. (The RDS mode not employed by the station cannot be

selected.) Illumination of the indicator at the head of a name of an RDS mode shows that the corresponding RDS mode is selected.

* When an RDS station is received, do not press the RDS MODE/FREQ button until one or more RDS mode names light up in the

display. If the button is pressed before one or more names light up in the display, the mode cannot be changed because the unit

has not received all of the RDS data on the station yet.

* If no RDS mode name lights up in the display, the mode cannot be changed.

PS mode The name of the station being received is displayed.

If the station does not employ the PS data service, this mode cannot be

selected.

PTY mode The type of the program on the station being received is displayed. If

the station does not employ the PTY data service, this mode cannot be

selected.

(You can make this unit search for a station which is broadcasting a

program of your desired program type. For details, refer to the next

page.)

RT mode Information about the program on the station being received is

displayed. Information is displayed by a maximum of 64 Roman

Alphabets including umlaut sign. If other characters are used on the RT

data, they are displayed with under-bars.

If the station does not employ the RT data service, this mode cannot be

selected.

CT mode Current time is displayed in the following form. The CT data from the

station being received changes every minute.

If the data is accidentally cut off, “CT WAIT” may light up. If the station

does not employ the CT data service, this mode cannot be selected.

Frequency The frequency of the station being received is displayed.

display mode

RDS MODE/

FREQ

➤

➤ ➤

➤

Hour

Minute

Notes

● RDS data service cannot be utilized by this unit if the received signal is not strong enough. The RT (Radio Text) in particular

transmits a great deal of data and needs strong signal reception to be successfully transmitted, so it may occur that RT mode

cannot be displayed even if other RDS modes (PS, PTY, etc.) are displayed.

● There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press the TUNING MODE

button so that the “AUTO” indicator goes off from the display. Though the reception mode is changed to monaural by this

operation, when you change the display to an RDS mode, RDS data may be displayed.

● If the signal strength becomes weakened by external interference during RDS station reception, the RDS data service may be cut

off suddenly and “...WAIT” will be displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha HTR-5130 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info