Bedienungsanleitung Yamaha HTR-6230 (Seite 23 von 196) (Italienisch, Spanisch)

516960

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

19 En

Playback

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

Use the following features to select input jack or input

source.

■ Selecting the front speaker set

Press CSPEAKERS repeatedly change the

active front speaker set that is connected to the

FRONT A or FRONT B speaker terminals or turn

off the front speakers.

The active front speaker set changes as follows:

Note

• Turn off the volume level of this unit before you switch the front speaker

setting.

■ Using the Zone B feature

When you set “FRONT B” to “ZONE B” (see page 32),

you can use the speakers connected to FRONT B speaker

terminals in another room (Zone B).

Press CSPEAKERS on the front panel

repeatedly to turn on or off the Zone B speakers.

When you activate the Zone B speakers, all the speakers in

the main room are muted.

Notes

• You cannot activate both the main room and Zone B speakers

simultaneously.

• If you select CINEMA DSP sound field program and activate the Zone B

speakers, Virtual CINEMA DSP is activated automatically (see page 26).

■ Selecting the component connected to the

MULTI CH INPUT jacks as the input source

Use this feature to select the component connected to the

MULTI CH INPUT jacks (see page 14) as the input

source.

Press NINPUT l / h repeatedly (or press

fMULTI CH IN) to select “MULTI CH.”

“MULTI CH” appears on the front panel display.

• You can configure the multi channel input settings in “MULTI CH” (see

page 35).

Notes

• Sound field programs, or the night listening mode, etc. cannot be selected

when “MULTI CH” is selected as the input source.

• When headphones are used, signals are output only from the front left

and right channels.

■ Selecting audio input jacks (AUDIO SELECT)

Use this feature (audio input jack select) to switch the

input jack assigned to an input source when two or more

jacks are assigned to an input source.

• We recommend that you set the audio input jack select to “AUTO” in

most cases.

• You can adjust the default audio input jack select of this unit by using

“AUDIO SELECT” in “OPTION MENU” (see page 36).

1 Press NINPUT l / h repeatedly (or press

one of the input selector buttons (e)) to

select the desired input source.

2 Press nAUDIO SEL repeatedly to select the

desired Audio input jack select setting.

• You can configure the audio input jack select setting in “AUDIO

SELECT.”

Note

• This feature is not available if no digital input jack is assigned to

the selected input source in “INPUT ASSIGN” (see page 34).

Guide to contents

When you want... See page

Adjust the tonal quality of the front

speakers

Edit parameters of sound field

programs

Enjoy the sources which have wide

dynamic range at night

Use headphones 20

Select a decoder to play back

sources with

Set this unit to the standby mode

automatically

Additional operations

Using input setting features

FRONT A FRONT B

OFF

Choice Function

AUTO Automatically selects input signals in

the following order:

(1) Digital signals

(2) Analog signals

ANALOG Selects only analog signals. If no

analog signals are input, no sound is

output.

A.SEL:AUTO

DVR DVD CD

V-AUX DTV/CBL

MD/CD-R

TUNER

Audio input jack select setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha HTR-6230 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha HTR-6230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info