Bedienungsanleitung Yamaha KX-W421 (Seite 13 von 107) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

557711

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH

PROTECTING YOUR RECORDINGS

All cassette tapes are provided with erasure protection holes

to prevent accidental erasure of recorded contents. There is

a small tab covering the hole on each side of the cassette,

and it should be broken off after recording the tape. Without

this tab covering the hole, it is impossible to record onto that

tape. Thus, you can safely protect a recording for as long as

you wish without fear of accidental erasure. Should you wish

to use a cassette tape protected in this way for recording,

simply covering the hole with adhesive tape will permit

erasure and re-recording.

÷ When using Chrome (Type II/HIGH <CrO

2>) or Metal

(Type IV/METAL) tapes, make sure you do not cover the

hole intended for the Auto Tape Selector operation.

TAKING UP SLACK IN THE TAPE

As a precaution against tape entanglement and damage,

remove any slack in the tape before inserting cassettes into

the deck. This is accomplished by inserting a pencil, pen or

similar object into one of the spools and gently winding it

until all the slack is removed. You do not have to wind it too

tightly.

Be careful not to touch the tape part itself. It is very delicate

and touching it may damage the tape and its recorded

contents.

STORING CASSETTES

After putting a cassette tape back into its case, store it in a

location away from exposure to direct sunlight, humidity,

high temperatures, and magnetic fields (away from television

sets, speakers, etc.). High temperatures and humidity will

damage the tape itself, while exposure to magnetic fields

may cause a loss of recorded material. Avoid touching the

tape surface with your fingers, since dirt or finger oil will

contaminate the deck’s heads.

CASSETTE TAPES

There are many different types of cassette tapes available.

However, they all conform to standard specifications so any

brand may be used with the deck.

÷ Classification of Cassette Tapes by Formulation:

Cassette tapes are available in four basic types depending

on their formulation, or type of magnetic material and

manufacturing process. These four types are commonly

known as Normal (Type I/NORM), Chrome (Type II/HIGH

<CrO

2>), Ferrichrome (Type III/FeCr), and Metal (Type IV/

METAL), and they each require specific tape deck

adjustments for optimum performance.

* YAMAHA does not recommend the use of 120 minute

length cassettes since the extreme thinness of the tape

makes them susceptible to mechanical and recording

problems.

AUTO TAPE SELECTOR DETECTION SLOTS

The deck has a built-in Auto Tape Selector which

automatically adjusts for the proper bias, level and

equalization according to the tape formulation — all you

have to do is to load a cassette and the Auto Tape Selector

does the rest.

The Auto Tape Selector determines which type of tape is

loaded by sensing detector slots in the top of the tape shell.

Each tape formulation has its own characteristic hole

markings standardized by the tape industry.

÷ Early model Metal (Type IV/Metal) tape formulation

cassette shells do not have the slots for Auto Tape

Selector operation. As a result, early model Metal type

tapes recorded on another deck will be played back with

the deck at the Chrome (Type II/HIGH <CrO

2>) settings.

YAMAHA does not recommend using this kind of tape.

÷ The deck does not have the required setting for

Ferrichrome (Type III/FeCr) tape, since this tape

formulation is not widely used. Should you use a

Ferrichrome tape, it will be recorded and played back at

the Normal (Type I/NORM) settings, which will result in an

unnatural high frequency emphasis. This effect may be

compensated for somewhat by adjusting the PLAY TRIM

control and/or the tone controls of your amplifier/receiver

during playback.

Detector slotsDetector slots

TYPE II TYPE IV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha KX-W421 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info