Bedienungsanleitung Yamaha LPX-500 (Seite 4 von 80) (Englisch)

464191

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

III

Caution: Read this before operating this unit.

•

••

•

To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

Installation

•

••

•

Install this unit in a well-ventilated, cool, dry, clean

place with at least 10 cm clearance on the top, right and

left, and at the back of this unit — away from direct

sunlight, heat sources, vibration, dust, moisture, and/or

cold.

•

••

•

Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds. To

prevent fire or electrical shock, do not place this unit

where it may get exposed to rain, water, and/or any type

of liquid.

•

••

•

Do not expose this unit to sudden temperature changes

from cold to hot, and do not locate this unit in an

environment with high humidity (i.e. a room with a

humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to this

unit, and/or personal injury.

•

••

•

On the top of this unit, do not place:

—Other components, as they may cause damage and/or

discoloration on the surface of this unit.

—Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

—Containers with liquid in them, as they may cause

electrical shock to the user and/or damage to this unit.

•

••

•

Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to restrict heat dissipation. If the

temperature inside this unit rises too much, it may cause

fire, damage to this unit, and/or personal injury.

•

••

•

When installing this unit on the ceiling, make sure the

ceiling has sufficient strength to support this unit and the

ceiling mounts for an extended period of time.

Installation must be performed only by qualified service

personnel.

Operation

•

••

•

Remove the lens cap before starting any operation of this

unit to prevent the heat from staying around the lens.

Operation with the cap on may cause damage to this

unit.

•

••

•

Do not plug in this unit to a wall outlet until all

connections are complete.

•

••

•

Only the voltage specified on this unit must be used.

Using this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit, and/

or personal injury. YAMAHA will not be held

responsible for any damage resulting from use of this

unit with a voltage other than that specified.

•

••

•

Do not use force on switches, knobs and/or cords.

•

••

•

Take care of this unit so that no foreign objects and/or

liquid drop inside this unit.

•

••

•

To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

•

••

•

Do not look into the lens while this unit is turned on. It

may cause serious damage to your eyesight.

•

••

•

Before moving this unit, press

STANDBY/ON

to set

this unit in the standby mode, and disconnect the AC

power plug from the wall outlet.

•

••

•

Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any service

is needed. The cabinet should never be opened for any

reason.

•

••

•

When not planning to use this unit for a long period of

time (i.e. vacation), disconnect the AC power plug from

the wall outlet.

•

••

•

When disconnecting the power cord from the wall outlet,

grasp the plug; do not pull the cord.

•

••

•

Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit

is faulty.

Others

•

••

•

Clean the lens carefully so as not to create any scratches

by using a blower or lens paper.

•

••

•

Replace the lamp when the LAMP/COVER indicator

flashes in red after the lamp usage has exceeded 1000

hours. Follow the lamp replacement procedure described

in this manual.

For U.K. customers

•

••

•

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off

and an appropriate 3 pin plug fitted. For details, refer to

the instructions described below.

Note

•

••

•

The plug severed from the mains lead must be destroyed, as

a plug with bared flexible cord is hazardous if engaged in a

live socket outlet.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off. This state is called the standby

mode. In this state, this unit is designed to consume a

very small quantity of power.

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE

COLOURED IN ACCORDANCE WITH THE

FOLLOWING CODE:

GREEN-AND-YELLOW: EARTH

BLUE: NEUTRAL

BROWN: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured GREEN-AND-YELLOW must

be connected to the terminal in the plug which is marked by

the letter E or by the safety earth symbol or coloured

GREEN or GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must be connected to

the terminal which is marked with the letter L or coloured

RED.

For Canadian Customers

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

Yamaha LPX-500 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha LPX-500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info