464192
69
Zoom out
Zoom in
Vorherige Seite
1/81
Nächste Seite
Part Names and Functions
66
Remote Control
Indicator
Illuminates when remote control signals are
being output.
[Zoom] button (p.11)
Press to adjust the size of projected images.
[IRIS] button (p.17)
Press to adjust the brightness of images using
the lens aperture.
[ESCAPE] button (p.38, 39)
When pressed while a menu or selection menu
is being displayed, the screen changes to the
previously-displayed menu.
[ASPECT] button (p.19)
Displays a selection menu for selecting the
aspect.
[LIGHT] switch (
Setup Guide)
When the switch is tilted up or down, the
[ESCAPE], [ASPECT], [MENU] and [INPUT]
buttons light. After approximately 10 seconds
have passed, the illumination automatically
turns off.
[INPUT] button (p.7)
Lets you select the input port directly. The [A]
and [B] buttons change the "Input Signal"
setting in the order COMPONENT RGB TV
RGB PC each time a button is pressed.
button (p.7, 9)
Press to turn the projector's power on and off.
[Focus] button (p.16)
Press to adjust the focus of the projection lens.
[PATT] button (p.14)
Displays a selection menu for selecting a test
pattern.
[MENU] button (p.18, 26, 37, 38, 39)
The menus turn on and off each time the [Menu]
button is pressed.
button (p.11, 14, 16, 17, 18, 19, 27,
37, 38, 39)
Press to display the line menu.
When tilted vertically or horizontally while a
menu or selection menu is being displayed, a
menu command is selected, and if the button is
pressed, the selected command is executed or
confirmed.
[INPUT] button (p.7)
Displays a selection menu for selecting the
image source.
[HIDE] button (p.35)
The projected images switch off and on each
time the [HIDE] button is pressed.
When the images are switched off, the screen
will appear in accordance with the setting made
using the “Hide Screen” command in the
“Setup” menu.
However, the video playback still continues
while moving images are paused, so image
playback will not resume exactly from the point
where playback was paused.
[MEMORY] button (p.27)
Retrieves the settings stored using the "Memory
Save" command in the "Image" menu and
applies them to the projected images.
456
123
VIDEO
HIDE
INPUT
MENU
PAT TIRIS
SETTING
ASPECT
ZOOM FOCUS
ESCAPE
LIGHT
BD4
S VIDEO
A
INPUT
MEMORY
HDMI
LPX-510_E.book Page 66 Wednesday, January 21, 2004 10:58 AM
69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha LPX-510 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info