Bedienungsanleitung Yamaha mcx 1000 (Seite 28 von 148) (Englisch)

159232

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Storing music on the MusicCAST server

7 Select the input to use.

• When recording from a component connected to

the OPTICAL IN jack on the MusicCAST server:

Use / / / to move the cursor to “Optical” and press

SELECT.

• When recording from a component connected to

the COAXIAL IN jack on the MusicCAST server:

Use / / / to move the cursor to “Coaxial” and press

SELECT.

• When recording from a component connected to

the ANALOG IN jacks on the MusicCAST server:

Use / / / to move the cursor to “Analog” and press

SELECT.

The MusicCAST server indicates the method you select by

displaying an arrow to the left of the selected setting.

8 Set the recording level as necessary.

See page 28 for an explanation on adjusting recording levels.

9 Adjust the recording mode as necessary.

Use / / / to move the cursor to an appropriate recording

type and press SELECT. See page 29 for more information.

Use / / / to move the cursor to “REC Start”

and press SELECT.

Recording begins. The MusicCAST server assigns the date and

time of recording to the new track.

Start playback on the external component.

To pause recording on the MusicCAST server, use / / /

to move the cursor to “REC Stop” and press SELECT.

To start recording again, use / / / to move the cursor to

“REC Start” and press SELECT.

To finish recording, use / / / to move the

cursor to “REC stop” and press SELECT.

The MusicCAST Server records the songs to its hard disk drive

as PCM files only, which you cannot access for playback from

MusicCAST clients. To make them available for playback on

MusicCAST clients, register each recorded track to the

MusicCAST server library by moving it or editing its name

(see page 72), which begins the process of converting the song

to MP3 format.

• Do not turn off system power during the storage process as

errors in storage may appear, along with problems with data

on the hard disk drive.

• Do not bump or vibrate the MusicCAST server during

storage, as it may damage the hard disk drive.

• You can playback other songs stored in the MusicCAST

server while it is recording.

- You cannot register tracks less than 4 seconds long to the

MusicCAST server library.

Adjusting the recording level

There are different methods for adjusting recording

levels for each source. Select the appropriate method

for your recording source from those listed here.

When recording from a digital source

The MusicCAST server digitally records anything from

components connected to its coaxial or optical input

jacks.

You do not normally need to adjust this level, but you

can use the following procedure to do so if necessary.

1 Follow the procedure described on page 27 to

display the “Store from External Inputs” screen

on the on-screen display.

2 Play back the loudest part of the source you

wish to record.

3 During playback, use / / / to move the

cursor to “Digital Volume”, and use / to

adjust the parameter.

You can set the parameter from –12dB to + 12dB, in steps of

0.4dB.

Adjust the parameter so that the indicator on the level meter

does not exceed 0dB.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha mcx 1000 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha mcx 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info