Bedienungsanleitung Yamaha MDX-E300 (Seite 22 von 184) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

557717

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

EDITING

Divide

This function lets you divide one track into two separate

tracks by adding a new track number to a specified point

in the track.

Example: Dividing track 3

1 Play the track you want to divide.

2 Use ! or ⁄ to locate the point where you want to

divide the track, then press * to pause at that

position.

3 Press EDIT repeatedly to display “Divide ?”, then

press SET/ENTER.

•“Check” appears momentarily, then “Divide

OK ?” appears and the MD recorder starts

repeating the point where the track will be

divided.

4 If necessary, use $ or › to adjust the position of

the point where the track will be divided.

• The dividing position can be adjusted up to 2

second (255 steps) in either direction.

5 Press SET/ENTER.

• The track is divided and “Complete” appears

momentarily.

Undo

The UNDO function lets you immediately return to the

condition before an edit is made (note: you cannot undo

an edit once you press any other button).

1 Press & to stop the MD recorder.

2 Press EDIT repeatedly to display “Undo ____

”,

then press SET/ENTER.

•“Undo OK ?” appears in the display. To cancel

undoing, press &.

____*1

: The type of editing you can undo is displayed

here.

3 Press SET/ENTER again to undo.

Note

• You cannot undo an edit once it has been written to the TOC.

TOC write

When making a recording, the TOC (Table Of Contents)

of the MD is written as soon as recording is finished.

When making disc edits or titling, however, the TOC isn’t

automatically written unless the disc is ejected. If the unit

is accidentally turned off before writing edits or titling to

the TOC, it is possible that these changes will not be

saved. By using this function, you can ensure that your

edits or titles are saved on the disc.

1 Press & to stop playback.

2 Press EDIT repeatedly to display “TOC Write ?”,

then press SET/ENTER.

•“TOC Write OK ?” appears.

3 Press SET/ENTER.

•“TOC Writing” blinks in the display momentarily.

Note

• The TOC Write function can only be selected when the TOC

indicator is lit in the display.

FRA check

When edit functions such as “MOVE” and “DIVIDE” are

performed, spaces of recordable space may be lost and

“TOC Full” may appear in the display to indicate that no

more recording can be performed. When this occurs, it

may be possible to recover the FRA (Freely Recordable

Area) on the disc that was lost during edit functions so

that more recording is possible.

1 Press & to stop playback.

2 Press EDIT repeatedly to display “FRA Check ?”,

then press SET/ENTER.

•“FRA Check OK ?” appears.

3 Press SET/ENTER.

•“Complete” appears momentarily.

AB DEC

3456

A B C2 DC1

3456

Before

dividing

After

dividing

0106MDXE300(M).17-20.E 02.5.17, 10:54 AM20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MDX-E300 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info