Bedienungsanleitung Yamaha MG16XU (Seite 6 von 40) (Englisch)

655877

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

MG20XU/MG20/MG16XU/MG16/MG12XU/MG12 Owner’s Manual

Maintenance

• Remove the power plug from the AC outlet when cleaning

the device.

Handling caution

• Do not insert your fingers or hands in any gaps or openings

on the device (vents).

• Avoid inserting or dropping foreign objects (paper, plastic,

metal, etc.) into any gaps or openings on the device (vents).

If this happens, turn off the power immediately and unplug

the power cord from the AC outlet. Then have the device

inspected by qualified Yamaha service personnel.

• Do not rest your weight on the device or place heavy

objects on it, and avoid use excessive force on the buttons,

switches or connectors.

• Do not use speakers or headphones for a long period of

time at a high or uncomfortable volume level, since this can

cause permanent hearing loss. If you experience any

hearing loss or ringing in the ears, consult a physician.

NOTICE

To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices

below.

 Handling and Maintenance

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the

device, TV, or radio may generate noise.

• Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or

in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the inter-

nal components.

• Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel.

• When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impreg-

nated wiping cloths.

• Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved

from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is

present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several

hours without turning on the power until the condensation has completely dried out.

• Avoid setting all equalizer controls and faders to their maximum. Depending on the condition of the connected devices,

doing so may cause feedback and may damage the speakers.

• Do not apply oil, grease, or contact cleaner to the faders. Doing so may cause problems with electrical contact or fader motion.

• When turning on the AC power in your audio system, always turn on the power amplifier LAST, to avoid speaker damage.

When turning the power off, the power amplifier should be turned off FIRST for the same reason.

• Always turn the power off when the device is not in use.

 Connectors

XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).

Information

 About this manual

• The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those

on your device.

• Steinberg and Cubase are registered trademarks of Steinberg Media Technologies GmbH.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective

companies.

• This manual covers the MG20XU/MG20, MG16XU/MG16, and MG12XU/MG12 mixing consoles. In cases where different

features need to be described for each model, the features for the MG16XU/MG16 and MG12XU/MG12 will be enclosed in

brackets. (Example: CH13/14 – 19/20 {CH9/10 – 15/16} {CH1 – 7/8})

• In this manual, the term “MG” refers to all models collectively. The term “XU models” refers to the MG20XU, MG16XU, and

MG12XU.

• Throughout this manual, all panel illustrations show the panel of the MG16XU, unless noted otherwise.

Yamaha cannot be held responsible for damage caused

by improper use or modifications to the device, or data

that is lost or destroyed.

The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at

the rear of the unit. You should note this serial number in the space provided below and retain this manual as a per-

manent record of your purchase to aid identification in the event of theft.

Model No.

Serial No.

(rear_en_01)

PA_en_2 2/2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MG16XU Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MG16XU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info