Bedienungsanleitung Yamaha MO6 (Seite 31 von 240) (Englisch)

530340

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Basic Operation

About data storage to USB storage devices

Owner’s Manual

Using USB storage devices

When using USB storage devices, make sure to connect them to the USB TO DEVICE connector, and follow the important

precautions below.

■ Compatible USB devices

Connect only a USB storage device (such as hard disk,

CDROM, ﬂash disk and other drives) to the USB TO

DEVICE connector. Other devices such as a computer

keyboard or mouse cannot be used.

Both bus-powered (powered by the host device) or self-

powered (battery or external power supply) types can be

used.

The MO does not necessarily support all commercially

available USB storage devices. Yamaha cannot guarantee

operation of USB storage devices that you purchase.

Before purchasing USB storage devices, please consult

your Yamaha dealer, or an authorized Yamaha distributor

(see list at end of the Owner’s Manual) for advice, or see

the following website:

http://www.yamahasynth.com/

n Although CD-R/W drives can be used to load data to the

instrument, they cannot be used for saving data. However, you can

transfer data to a computer and save data to a CD using the CD-R/

W drive on the computer.

■ Formatting USB storage media

When a USB storage device is connected or media is

inserted, a “USB device unformatted.” message may

appear in the LCD display, indicating that the device or

media must be formatted for use. Execute the Format

operation in the File mode (page 211).

■ To protect your data (write-protect):

To prevent important data from being inadvertently erased,

apply the write-protect provided with each storage device

or media.

If you are saving data to the USB storage device, make

sure to disable or remove write-protect.

Precautions when using the USB TO DEVICE

connector

Never turn the USB device’s power on/off and never plug/unplug

the USB cable when the connected USB storage device is the self

powered type. Doing so may result in the operation of the

synthesizer “freezing” or hanging up.

While the instrument is accessing data (such as in the Save,

Load and Delete operations in the File mode), do NOT unplug the

USB cable, do NOT remove the media from the device, and do

NOT turn the power off to either device. Doing so may corrupt the

data on either or both devices.

CAUTION

USB connector types

There are two different types of USB connectors, and

the rear panel of the instrument features both. Take

care not to confuse the two.

■ USB TO HOST connector

This type is used to connect the instrument to a computer,

and allows you to transfer MIDI data between the devices.

The USB connection between the instrument and the

computer can only be used for transfer of MIDI data. Unlike

MIDI, USB can handle multiple ports via a single cable.

USB cables may have different connectors on each end: the

A type and the B type. Connect the A type to your computer

and the B type to the USB TO HOST connector.

■ USB TO DEVICE connector

This type is used to connect the instrument to a USB storage

device, and allows you to save data you’ve created to the

connected device, as well as load data from the connected

device. This lets you save the data created on this instrument

to the external USB storage device and load the data from

the external USB storage device to the instrument. Save and

Load operations are executed in the File mode (page 211).

USB cables may have different connectors on each end: the

A type and the B type. Connect the A type to the USB TO

DEVICE connector and the B type to the USB storage

device.

n The computer cannot access the USB storage device

connected to the USB TO DEVICE connector on the MO,

even if connecting as shown above. Only from the File mode

on the instrument itself can you access the data on the USB

storage device connected to the USB TO DEVICE

connector.

n Though the MO supports only up to the USB 1.1 standard,

USB 2.0 storage devices can be connected and used with

the instrument. However, note that the transfer speed

complies to USB 1.1.

MIDI data transfer

Connecting to

a computer

Saving/loading data in

the File mode (page 211)

A type

B type

USB TO DEVICE

connector

USB TO HOST

connector

Connecting to a USB

storage device (hard

disk, CD-ROM, ﬂash

disk and other

devices)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MO6 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info