Bedienungsanleitung Yamaha MO6 (Seite 35 von 240) (Englisch)

530340

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Basic Operation

Moving the Cursor and Setting Parameters

Owner’s Manual

Moving the Cursor and Setting Parameters

■ Inputting a number directly

For parameters having large value ranges (such as the Song measure), you can also enter the value directly, using the

buttons below the LCD display as a numeric keypad. When the cursor is located on such a parameter, the [NUM] icon

appears at the lower right corner of the LCD display indicating that you can call up the number input window by pressing the

[INFORMATION] button. From this window, you can input a number directly by pressing the [F1] – [F6] buttons and the [SF1]

– [SF5] buttons (or Number [1] – [10] buttons). First, press the [F6] button so that the cursor appears at the Input Number

within the bracket. Move the cursor to the desired digit by using the Cursor buttons [>] and [<], then input the number of the

selected digit. After completing the number input, press the [ENTER] button to actually enter the number. Press the [EXIT]

button to go back to the original display.

n You can also input a number directly by pressing the Number [1] – [10] buttons. In this case, the [10] button is used to input “0.”

■ Selecting a note type

When the cursor is located on the parameter to which the note type is set, the note icon appears at the lower right corner

indicating that you can call up the Note Type selection window by pressing the [INFORMATION] button. You can specify the

note type by pressing the [F1] – [F6] buttons and the [SF1] – [SF5] buttons. After selecting one of the note types, press the

[ENTER] button to actually enter the selection. Press the [EXIT] button to go back to the original display.

EXIT ENTER

EXECUTE

DEC/NO INC/YES

Moving the cursor

Use these four buttons to navigate the display, moving

the cursor around the various selectable items and

parameters in the screen. When selected, the relevant

item is highlighted (the cursor appears as a dark block

with inverse characters). You can change the value of

the item (parameter) at which the cursor is located by

using the data dial, [INC/YES] and [DEC/NO] buttons.

Changing (editing) parameter values

Rotating the data dial to the right (clockwise) increases

the value, while rotating it to the left (counter-clockwise)

decreases it.

For parameters with large value ranges, you can

increase the value by 10 by simultaneously holding

down the [INC/YES] button and pressing the [DEC/NO]

button. To decrease by 10, do the opposite;

simultaneously hold down the [DEC/NO] button and

press the [INC/YES] button.

F1 F2 F3 F4 F5 F6

SF1 SF2 SF3 SF4 SF5 INFORMATION

F1 F2 F3 F4 F5 F6

SF1 SF2 SF3 SF4 SF5 INFORMATION

SCENE

Number Input window

SCENE

F1 F2 F3 F4 F5 F6

SF1 SF2 SF3 SF4 SF5 INFORMATION

F1 F2 F3 F4 F5 F6

SF1 SF2 SF3 SF4 SF5 INFORMATION

SCENE

Note type selection window

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MO6 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info