Bedienungsanleitung Yamaha MO6 (Seite 51 von 240) (Englisch)

530340

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Using the Controllers on the MO

Owner’s Manual

Quick GuidePlaying the MO

Knob

Changing the sounds

You can change the brightness and tone characteristics of the current Voice, Performance, Song or Pattern in realtime by

turning the knobs while you play. Rotating it to the right (clockwise) increases the program number, while rotating it to the left

(counter-clockwise) decreases it. You can select the function set assigned to the knobs among the following seven sets by

pressing the appropriate Control function button.

Function sets assigned to the Knobs

* For Drum Voices, this affects the release time for all played notes, whether held or released.

** Available only when setting the Zone Switch to on in the Master Mode (page 215)

When pressing any of the Control function buttons, the lamp(s) of the buttons will light according to the above table, and the

status of the Knobs and Control sliders (currently assigned functions and set values) is shown on the LCD display. The

appearance of the knob and slider in the display indicates the actual control status of the knob and slider.

When a knob graphic in the display is black or a slider graphic is shown with a shadow, the corresponding Knob or Control

slider on the panel affects the sound as indicated.

A white knob graphic or a slider graphic without a shadow indicates that the current Knob or Control slider position differs

from the actual parameter value. In this case, moving the knob or slider does not affect the sound until the knob or slider

position reaches the parameter’s current value (after which the knob graphic turns black or the slider graphic has a

shadow).

Operation

Button of which the

lamp is turned on

Functions controlled by each Knob

KN1 (Knob 1) KN2 (Knob 2) KN3 (Knob 3) KN4 (Knob 4)

When pressing the [PAN/

SEND] button

[PAN/SEND] button Pan (stereo position)

of the Voice/

Performance

Reverb Send Level Chorus Send Level Tempo of the Song/

Pattern/Arpeggio

playback

When pressing the [TONE]

button

[TONE] button Filter Cutoff

Frequency (degree of

brightness)

Resonance (the level

of the signal in the

area of the cutoff

frequency)

Attack Time of the

sound

Release Time of the

sound (decay time

after the key is

released)*

When pressing the [ARP

FX] button

[ARP FX] button Swing degree of the

Arpeggio playback

Gate time (length) of

the Arpeggio

playback

Velocity of the

Arpeggio playback

time

When pressing the [EQ]

button

[EQ] button Low band of the

Master EQ in the

Voice/Performance

mode, part EQ in the

Song/Pattern mode

Low-mid band of the

Master EQ in the

Voice/Performance

mode, Mid band of

the Part EQ in the

Song/Pattern mode

High-mid band of the

Master EQ in the

Voice/Performance

mode. (Not available

in the Song/Pattern

mode.)

High band of the

Master EQ in the

Voice/Performance

mode, part EQ in the

Song/Pattern mode

When pressing the [PAN/

SEND] button and the

[TONE] button

simultaneously

[PAN/SEND] button

[TONE] button

Function assigned from the [UTILITY] → [F4]

CTLASN → [SF2] ASSIGN display (page 208) in

the Utility mode

Function assigned for each Voice from the

[VOICE] → [EDIT] → [COMMON] → [F4]

CTLSET display (page 155)

When pressing the [TONE]

button and the [ARP FX]

button simultaneously**

All the buttons are off Function assigned for each Master from the [MASTER] → [EDIT] → Zone selection → [F5] KN/CS

display (page 217)

When pressing the [ARP

FX] button and the [EQ]

button simultaneously

[ARP FX] button

[EQ] button

Function assigned to the Master Effect parameters from the [UTILITY] → [F4] CTLASN → [SF5]

MEF display.

ASSIGN A

PAN

CUTOFF

SWING

LOW

ASSIGN B

REVERB

RESONANCE

GATE TIME

LOW MID

ASSIGN 1

CHORUS

ATTAC K

VELOCITY

HIGH MID

ASSIGN 2

TEMPO

RELEASE

UNIT MULTIPLY

HIGH

DAW REMOTE PAGE SELECT

PAN SEND

TONE

ARP FX

ASSIGN

MEF

Adjusting these knobs/sliders affects the sound immediately.

Adjusting these knobs/sliders will not affect the sound until

the current value is reached.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MO6 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info