Bedienungsanleitung Yamaha MO6 (Seite 75 von 240) (Englisch)

530340

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Playing the Demo Songs/Patterns

Quick GuideCreating a Song on the MO

Owner’s Manual

There is another way to start Pattern playback—by

pressing the notes on the keyboard. Move the cursor to the

keyboard icon and press the [INC/YES] button so that the

mark appears. In this status, press any key to start the

Pattern playback.

Make sure that the [SECTION] lamp is on (press the button

if necessary), then press any of the buttons shown below to

select and play the various Sections contained in a Pattern.

Pressing the [A] – [H] buttons calls up Sections A – H and

pressing the [PRE1] – [–] buttons calls up Sections I – P.

n Some Sections of the Demo Pattern may have no data. Because of

this, selecting some Sections may result in no sound.

Unlike Song playback, Pattern playback continues in a

loop until the [J] (Stop) button is pressed.

You can stop the Pattern anytime during playback by

pressing the [J] (Stop) button. This pauses the Pattern at

the current position. To resume playback of the Pattern

from that point, press the [F] (Play) button again. To

instantly return to the beginning of the Pattern, press the

[ IE] (Top) button.

Selecting a Pattern is done in the same way as selecting a

Song. Refer to step 5 above.

Using Mute/Solo with the Song and

Pattern tracks

Try this with the Demo Songs to hear how the tracks sound

both in isolation and in various combinations.

■ To mute a track

The corresponding track is set to mute (its lamp goes off)

and produces no sound. When pressing the same number

button again, the track mute is canceled (its lamp lights).

To turn Mute off, press the [MUTE] button again (the lamp

goes off).

■ To solo a track

Simultaneously hold down the [MUTE] button and press

one of the Number buttons [1] to [16] to solo the

corresponding track. Once you’ve selected a track for

soloing, the [MUTE] button’s lamp ﬂashes, indicating the

Solo function is active.

While Solo is active, you can change the soloed track

simply by pressing the corresponding Number button [1] to

[16]. To cancel the Solo function, press the [MUTE] button

again.

Press the [PATTERN] button to enter the

Pattern mode.

Press the [F] (Play) button to start Pattern

playback.

Try out various rhythm variations by changing

the Section.

Press the [J] (Stop) button to stop Pattern

playback.

VOICE PERFORM MASTER

SONG PATTERN

DAW

REMOTE

EDIT

COMPARE SCENE STORE

SET LOCATE

FILE

JOB

UTILITY

DEMO

STORE

MODE

MIXING

PRE 1

A. PIANO

PRE 2

KEYBOARD

PRE 3

ORGAN

PRE 4 USER 1

BASS

USER 2

STRINGS

BRASS

–

SECTION

GUITAR

PLUCKED

REED PIPE

ABCDEFGH

SYN LEAD SYN PAD

CHOIR

SYN COMP DRUM

PERCUSSION

SE MUSICAL FX COMBI

CHROMATIC

PERCUSSION

Select and play another Demo Pattern.

Press the [MUTE] button (the lamp lights).

Press any of the NUMBER [1] – [16] buttons to

select the track number to be muted.

TRACK

SELECT

SOLO

MUTE

12345678

910111213141516

ELEMENT PERF. PART ZONE

TRACK

SELECT

SOLO

MUTE

12345678

910111213141516

ELEMENT PERF. PART ZONE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MO6 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info