Bedienungsanleitung Yamaha MO6 (Seite 84 von 240) (Englisch)

530340

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Quick Guide Creating a Song on the MO

Creating a Pattern

Owner’s Manual

n You can also edit the Groove parameters in real time during playback.

The created Song and Pattern data resides temporarily in DRAM (page 150). Because data contained in DRAM is lost when the power is turned off, you

should always store any data residing in DRAM to a USB storage device before turning off the power.

Creating a Pattern Chain

Each Pattern consists of 16 Sections (A – P) which can be used as Pattern variations. Create the desired rhythm Pattern

variations, or Sections, that you wish to use as accompaniment and backing for your new Song, according to the instructions

in the previous sections. After you’ve created the Sections, you can string these Sections together in any order desired to

assemble the backing part of the Song, over which you can record a melody line and any other parts, in the Song Record

mode.

n Pattern Mixing, Groove, and Phrase Voice (Track Voice) on/off cannot be set independently for each Section, but apply to all Sections.

The same User Phrases can be assigned to different Sections within a pattern. Keep in mind, however, that the Section data will automatically be

changed if another Section sharing the same User Phrase is changed. For example, if you’ve assigned a certain User Phrase to both Section A and

Section D, and you change that User Phrase for Section A, the same Phrase will be changed for Section D as well.

Select a track, then adjust the Groove settings.

Using the Groove settings to change the Pattern data

Grid Groove is a playback-only feature that processes the recorded data of a Pattern without actually changing it. In

other words, the original data (created via the Recording, File Loading and Patch functions) remains intact. If you want

to make the Grid Groove settings permanent and change the data, use Normalize Play Effect in the Pattern Jobs

([PATTERN] → [JOB] → [F5] TRACK → 04: Normalize Play Effect). From this display, specify the track to be changed

according to the Groove settings, and press the [ENTER] button to execute.

LOCATE

REC

SEQ TRANSPORT

TRACK

SELECT

SOLO

MUTE

12345678

910111213141516

ELEMENT PERF. PART ZONE

DEC/NO INC/YES

EXIT ENTER

EXECUTE

DEC/NO INC/YES

–

VELO OFST

GATE OFST

CLOCK SFT

NOTE OFST

NOTE OFST (Note Offset) Raises or lowers the pitch of the note(s) on the selected grid in semitones.

CLOCK SFT (Clock Shift) Shifts the timing of the note(s) on the selected grid forward or backward

in clock increments.

GATE OFST (Gate time Offset) Lengthens or shortens the note(s) on the selected grid in clock

increments.

VELO OFST (Velocity Offset) Increases or decreases the velocity of the note(s) on the selected grid.

Select a track.

Set each

parameter.

Play the Pattern

to check the

result of the

Groove settings.

Move the cursor to the desired

parameter and grid point and set

the offset value.

Move the cursor... Set the value.

Grid

CAUTION

TIP

........

Section A Section B Section F Section H

Convert

Song

Pattern Chain

.....Enter the desired Sections for the Song

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MO6 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info