Bedienungsanleitung Yamaha MO6 (Seite 221 von 240) (Englisch)

530340

221

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Appendix

221

Owner’s Manual

Display Messages

LCD Indication Explanation

Are you sure ? [YES]/[NO] Conﬁrms whether you want to execute a speciﬁed operation or not. Press [INC/YES] or [DEC/NO] as required.

Arp memory full The internal memory for Arpeggio data is full, preventing storing the recorded sequence data as an Arpeggio.

Arpeggio type stored The current Arpeggio type has been stored to one of the [SF1] - [SF5] buttons.

Bad USB device The USB storage device is unusable. Format the USB storage device and try again.

Bulk protected. Bulk data was received when RcvBulk was set to “protect.” (See page 209.)

Can’t make folder. No more directories can be created below the current level.

Can’t undo OK? [YES]/[NO]

When certain Song/Pattern Jobs are executed, internal memory becomes too full for use of the Undo operation.

Press [INC/YES] if this is OK, or [DEC/NO] to abort the operation. Try again after erasing unwanted Songs, Patterns,

or User phrases.

Choose user phrase.

You have attempted to record a Pattern track to which a preset phrase is assigned. If you wish to use a preset

phrase as raw material for Pattern recording, copy it to a User phrase before recording.

Completed. The speciﬁed load, save, format, or other Job has been completed.

Device number is off. Bulk data cannot be transmitted/received since the device number is off.

Device number mismatch. Bulk data cannot be transmitted/received since the device numbers don’t match.

Executing... A format operation or Job is being executed. Please wait.

File already exists. A ﬁle having the same name as the one you are about to save already exists.

File not found. The ﬁle of the speciﬁed type cannot be found on the USB storage device

Folder is too deep. Directories below this level cannot be accessed.

Folder not empty. You have attempted to delete a folder that contains data.

Illegal check box.

No check boxes have been checked in a Sequencer track Job which requires a check box selection. Check the

appropriate check box.

Illegal ﬁle The ﬁle speciﬁed for loading is unusable by the MO or cannot be loaded in the current mode.

Illegal ﬁle name. The speciﬁed ﬁle name is invalid. Try entering a different name.

Illegal input. An invalid input or value has been speciﬁed. Check the input method or value.

Illegal measure. An invalid measure number has been speciﬁed in the Song/Pattern mode. Select the measure again.

Illegal phrase number. An invalid phrase number has been speciﬁed in the Pattern mode. Select the phrase again.

Illegal track number. An invalid track number has been speciﬁed in the Song/Pattern mode. Select the track again.

Incompatible USB device A USB device which cannot be used with the MO has been connected to the USB TO DEVICE connector.

Meter mismatch

In the Pattern Job mode, the meter (time signature) of the destination Pattern is different from the meter of the source

Pattern.

MIDI buffer full. Failed to process the MIDI data because too much data was received at one time.

MIDI checksum error. An error occurred when receiving bulk data.

MIDI data error. An error occurred when receiving MIDI data.

Mixing stored In the Song/Pattern mode, the Mixing settings have been loaded from the ﬁle.

Mixing Voice full

The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the maximum

capacity.

No data.

When a Song/Pattern Job is executed, the selected track or range contains no data. Select an appropriate track or

range. In addition, this message appears when a Job related to a Mixing Voice cannot be executed because the

speciﬁed Mixing Voice is not available.

No F7 (End of Exc.)

Exclusive data has been entered or changed without the necessary “End of Exclusive” byte (F7). Make sure F7 is

included.

No response from USB device

There is no response from the USB device connected to the USB TO DEVICE terminal.

Not empty folder You have attempted to delete a folder that contains data.

Now loading... (xxxx) Indicates that a ﬁle is being loaded.

Now saving... (xxxx) Indicates that a ﬁle is being saved.

Now scanning auto loaded ﬁles Scanning for the ﬁles speciﬁed for Auto Load.

Now working... Canceling the Load/Save operation by pressing the [EXIT] button.

Overwrite? [YES]/[NO]

A save operation will overwrite data on the USB storage device, and this message conﬁrms whether it is OK to

continue or not. Press [INC/YES] or [DEC/NO] as required.

Pattern length mismatch. A Pattern Job will result in the length of a Pattern being greater than 256 measures.

Phrase length mismatch A Pattern Job will result in the length of a phrase being greater than 256 measures.

Phrase number overﬂow The maximum number of phrases (256) has been exceeded when recording, executing a Pattern Job, or editing.

Please keep power on.

The data is being written to Flash ROM.

Never attempt to turn off the power while data is being written to Flash ROM. Turning the power off while this

message is shown results in loss of all user data and may cause the system to freeze (due to corruption of data in

the Flash ROM). This may also result in the MO being unable to properly start up the next time the power is turned

on.

Yamaha MO6 Seite 221

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info