Bedienungsanleitung Yamaha MO6 (Seite 230 von 240) (Englisch)

530340

230

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Appendix

Troubleshooting

230

Owner’s Manual

■ Song/Pattern (Phrase) cannot be recorded.

• Is there enough free memory for recording? The total memory capacity determines the number of Songs/Patterns

(phrases) that can be recorded. For example, if the memory contains Songs/Patterns (phrases) that use up a large

amount of memory, the memory may become full even though the available Pattern or Song numbers are not all used.

• In the Pattern Record mode, does the speciﬁed track to which the Phrase is assigned have preset data? Recording

cannot be done to a track that contains preset data.

■ Cannot enter the Pattern Job mode/Pattern Mixing mode.

• Check whether this instrument is in the Pattern Chain mode or not. If so, exit from the Pattern Chain mode, then press the

[JOB] button or [MIXING] button.

■ The drum sound is wrong or unexpected when changing the transpose value.

• This is normal. Changing the transpose setting while playing a Drum Voice will produce different sounds for the same keys

played.

■ Data communication between the computer and this instrument does not work properly.

• Check whether the Port setting on the computer is appropriate or not.

• Is the cable setting (MIDI, USB) in the Utility mode appropriate?

■ This instrument does not sound properly even when playing back song data on a computer or a MIDI

instrument connected to this instrument.

• Make sure to set this instrument to the Song mode or Pattern mode. To play back multiple channels simultaneously, Song

mode or Pattern mode must be selected.

■ MIDI bulk data transmission/reception does not work properly.

• Is Bulk data receive protection enabled?

Turn the Receive Bulk parameter to “on.”

• When receiving recorded data with the internal Bulk Dump function, the device number must be set to the same value as

that used when transmitting/recording.

• When transmission does not work properly, is the device number of the MIDI instrument connected to this instrument set

to match the DeviceNo. parameter?

• When using the Voice Editor/Multi Part Editor, have you set a sufﬁcient Dump Interval?

The Dump Interval in the Editor Setup dialog must be set to 20ms or greater. For details refer to the PDF manual included

with the Editor.

■ Data cannot be saved in the USB storage device

• Is the connected USB storage device write protected? (Write-protect should be set to off for saving data.)

• Is the connected USB storage device properly formatted?

■ Cannot enter the Edit mode

• Is the Category Search function turned on?

After exiting from the Category Search function, press the [EDIT] button.

• Is this instrument in the File mode?

After exiting from the File mode, press the [EDIT] button.

[UTILITY] → [F5] MIDI → [SF4] OTHER → MIDI IN/OUT (page 210)

[UTILITY] → [F5] MIDI → [SF2] SWITCH → RcvBulk (page 209)

[UTILITY] → [F5] MIDI → [SF1] CH → DeviceNo. (page 209)

[FILE] → [F1] CONFIG → [SF2] FORMAT (page 211)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MO6 Seite 230

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info