530341
97
Zoom out
Zoom in
Vorherige Seite
1/240
Nächste Seite
Creating a Song
97
Owner’s Manual
Quick GuideCreating a Song on the MO
Editing a Mixing by using Control sliders (in the Song mode/Pattern mode)
In the Song/Pattern mode, the four Control sliders let you independently adjust the levels of the Parts (Voices), letting
you control the overall balance of the Parts.
n Inadvertent use of the sliders may result in no sound. If this occurs, move the sliders upward.
Creating an Arpeggio
In addition using the preset Arpeggios, you can also create your own original Arpeggio data.
Actually, there is no direct operation for recording Arpeggios. First, you have to record a Phrase to a Song or Pattern
track. Then, use the appropriate Song or Pattern Job function to convert the data to Arpeggio data.
Determining how Song/Pattern data is converted to an Arpeggio—Convert Type
MIDI sequence data (of Song/Pattern tracks) can be converted to Arpeggio data in one of three ways, according to
the Convert types below. These types can also be selected independently for each destination track—providing
enormous flexibility and performance control.
[SONG] Song selection [MIXING] [EDIT] Part selection [F2] OUTPUT [SF1] VOL/PAN Volume
Normal The Arpeggio is played back using only the played note and its octave notes.
Fixed Playing any note(s) will trigger the same MIDI sequence data.
OrgNotes (Original Notes) Basically same as “Fixed” with the exception that the Arpeggio playback notes differ according to the played chord.
TIP
TIP
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
User Arpeggio 256
Song or Pattern
Recording
Recording
Recording
Recording
12
Track 1
Track 2
Track 3
Track 4
User Arpeggio 001
Arpeggio
Convert
[SONG] [JOB] [F5] TRACK 07: Put Track To Arp
You can record MIDI sequence data for
the Arpeggio to any of the tracks. After
recording, select four tracks from all
sixteen and convert them to Arpeggio
data.
Specify the tracks of the source
Song or Pattern. Set unused
tracks to “off.”
Set the root note when the
convert type of any track is
set to “OrgNote.”
Specify the destination Arpeggio number.
Specify the source
Song/Pattern number
and measure range.
Select a convert type by track
(see below).
After setting the parameters as shown below,
press the [ENTER] button to execute Convert.
Convert the MIDI sequence data (recorded to the Song or Pattern) as
Arpeggio data.
Record the MIDI sequence data to be used
as the basis for base of the Arpeggio to a
Song or Pattern.
97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yamaha-mo8

Suche zurücksetzen

  • auf dem Display erscheint: without system?
    was mussich tun? Eingereicht am 13-1-2021 18:00

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha MO8 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha MO8

Yamaha MO8 Bedienungsanleitung - Deutsch - 239 seiten

Yamaha MO8 Bedienungsanleitung - Französisch - 239 seiten

Yamaha MO8 Bedienungsanleitung - Portugiesisch - 240 seiten

Yamaha MO8 Bedienungsanleitung - Spanisch - 240 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info