530341
109
Zoom out
Zoom in
Vorherige Seite
1/240
Nächste Seite
Quick GuideConnecting the MO to external devices
Connections
109
Owner’s Manual
Local On/Off—when Connected to a Computer
When connecting this synthesizer to a computer, the keyboard performance data is generally sent to the computer, and then returned
from the computer to play the tone generator block. If the Local Control in the Utility mode is set to “on,” a “double” sound may result,
since the tone generator is receiving performance data from both the keyboard directly and the computer. Use the setting suggestions
below as a guideline; specific instructions may differ depending on your computer and the software used.
When MIDI “Echo” (MIDI Thru) is set to “on” the software/computer:
n When transmitting or receiving System Exclusive data (such as with the Bulk Dump function), use the setting example below, making sure that
MIDI “Echo” (MIDI through) on the computer software is set to “off.”
When MIDI “Echo” (MIDI Thru) is set to “off the software/computer:
n Although not indicated in the illustration above, the MO actually receives and responds to MIDI data from the computer application (sequencer),
regardless of the Local Control setting on the MO.
* MIDI “Echo” is a function on sequencers that takes any data received via the MIDI IN and “echoes” it (or sends it as is) through the MIDI OUT. In some
software, this function is also called “MIDI Thru.”
n For details about MIDI Echo, refer to the owner’s manual of your particular software.
Quick Setup
The MO is capable of handling many different music applications—such as live performance, connection to a
computer for recording, etc. However, depending on the particular situation, you may have to change the MIDI
synchronize setting or the Local On/Off setting above manually.
To help with this, the MO features a convenient Quick Setup function that lets you instantly change important settings
for four different typical situations. For details about the Quick Setup function, see page 208.
MO
IN OUT
USB TO HOST
OUT
IN
Computer (SQ01, etc.)
MIDI Echo (MIDI thru) = on
Tone generator
block
Keyboard
[UTILITY] [F5] MIDI [SF2] SWITCH
LocalCtrl = off
OUT
IN
USB TO HOST
MO
Computer (SQ01, etc.)
MIDI Echo (MIDI thru) = off
Tone generator
block
Keyboard
[UTILITY] [F5] MIDI [SF2] SWITCH
LocalCtrl = on
TIP
109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yamaha-mo8

Suche zurücksetzen

  • auf dem Display erscheint: without system?
    was mussich tun? Eingereicht am 13-1-2021 18:00

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha MO8 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha MO8

Yamaha MO8 Bedienungsanleitung - Deutsch - 239 seiten

Yamaha MO8 Bedienungsanleitung - Französisch - 239 seiten

Yamaha MO8 Bedienungsanleitung - Portugiesisch - 240 seiten

Yamaha MO8 Bedienungsanleitung - Spanisch - 240 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info