530341
113
Zoom out
Zoom in
Vorherige Seite
1/240
Nächste Seite
Quick GuideConnecting the MO to external devices
Using the MO with computer software
113
Owner’s Manual
Remote-controlling the software
This powerful feature lets you control your music/audio software programs by using sliders and buttons on the panel of the
MO, rather than your computer’s mouse and keyboard. The MO can be used to control sequencer software and DAW
software, such as Cubase SX, Logic, and SONAR. These sequencers or DAWs are already set to respond to specific
hardware controllers.
Computer Software that can be controlled from the instrument
Setting up for Remote Control
n If the MO is connected to the computer by MIDI cable, the Remote
Control function cannot be used.
From the MO, you can remote-control the sequencer and
Multi Part Editor simultaneously using Mode A and Mode B.
When controlling Cubase SX via MIDI port 4
Mode A
Set the Port for remote control of the sequencer or DAW. Select your sequencer and the desired Port number. When
controlling Yamaha software, select “general.”
Mode B
Set the Port for remote control of the Multi Part Editor. When controlling the Multi Part Editor, select “general.” In this case, the
parameter is set to “off” because the Multi Part Editor is not used.
n The “general” setting is for remote control of the Yamaha software. This lets you control the Multi Part Editor in Mode A, and control Yamaha sequencer
software in Mode B.
n For details on how to operate the Editor, refer to the PDF manual included with the software.
Windows Macintosh
Cubase SX 3
SQ01
SONAR 4
MO6/MO8 Multi Part Editor
S90 ES Multi Part Editor
MOTIF ES Multi Part Editor
MOTIF-RACK Multi Part Editor
MOTIF-RACK ES Multi Part Editor
Cubase SX 3
Logic Pro 7
Digital Performer 4.52
MO6/MO8 Multi Part Editor
S90 ES Multi Part Editor
MOTIF ES Multi Part Editor
MOTIF-RACK Multi Part Editor
MOTIF-RACK ES Multi Part Editor
1
Connect the MO to the computer via USB
(page 107).
2
Set the following parameter to “USB.”
[UTILITY] [F5] MIDI [SF4] OTHER MIDI IN/OUT
3
Call up the Remote Control Setup display by
pressing the [F4] CTL ASN button, followed by
the [SF4] REMOTE button.
4
Select the software to be controlled and the
Port number.
Remote-control block
Tone generator block
Mixing settings of
Song Pattern
Port 4 (Mode A)
Port 1 (Playback data from sequencer)
Port 1 (Playback data from keyboard of MO)
Computer
Project file
(Song file)
Cubase SX
MO
113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yamaha-mo8

Suche zurücksetzen

  • auf dem Display erscheint: without system?
    was mussich tun? Eingereicht am 13-1-2021 18:00

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha MO8 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha MO8

Yamaha MO8 Bedienungsanleitung - Deutsch - 239 seiten

Yamaha MO8 Bedienungsanleitung - Französisch - 239 seiten

Yamaha MO8 Bedienungsanleitung - Portugiesisch - 240 seiten

Yamaha MO8 Bedienungsanleitung - Spanisch - 240 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info