Bedienungsanleitung Yamaha Montage 6 (Seite 18 von 86) (Englisch)

652603

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

Controls and Functions

% Knobs 1 – 8

These eight highly versatile knobs let you adjust various

important parameters, such as the current Part, Arpeggio

tempo, and the Motion Sequencer.

Pressing the knob function [TONE]/[EQ/FX]/[ARP/MS]

button, the Multi part control [MULTI] button, or the Assign

[ASSIGN] button in the upper left corner changes the

functions assigned to the knobs.

^ Control Sliders 1 – 8

These sliders control the volume balance of the sound, by

letting you adjust the individual levels of the 16 Parts (1 – 8 /

9 – 16), the eight Elements for Normal Parts (AWM2), the

eight FM Operators for a Normal Part (FM-X), and eight Keys

of the Drum Part, in different ways depending on the

conditions of the various buttons.

NOTE

• If all of the Control Sliders are set to the minimum, you may not

hear any sound from the instrument, even when playing the

keyboard or a Song. If this is the case, raise all the sliders to a

suitable level.

• The [MASTER VOLUME] slider controls the overall audio output

level of this instrument. On the other hand, the Control Sliders

control the level of each Element/Key/Operator of the Parts and the

volume for each Part of the Performance as a parameter.

Accordingly, the values set via the Control Sliders can be stored as

Performance data.

& SCENE [1] – [8] buttons

You can assign different “snapshots” of important Part-

related parameters such as track mute status and the basic

Mixing setup to the SCENE [1] – [8] buttons as Part Scenes.

When Scene-related parameters are edited and press any of

the SCENE [1] – [8] buttons while holding down the [SHIFT]

button, the edit is stored for the currently selected [SCENE]

button. The stored information is restored by pressing the

selected button. The currently selected button fully lights, the

button stored information lights dimly, and the button without

stored information is turned off.

* [ASSIGN] button

Switches the functions assigned to knobs as Assign 1 – 8.

By using the PART [COMMON] button and the Number A [1]

– [16] buttons, you can set whether the functions are

commonly effective for all Parts or only for one selected Part.

When the effect is turned on, the corresponding button

lights.

( KNOB POSITION [1] and [2] buttons

Stores the parameter values of Assign 1 – 8. You can

instantly switch between the two buttons.

A Super Knob

Simultaneously controls the parameters (Assign 1 – 8)

assigned to the eight knobs.

NOTE

You can also control the Super Knob by using the foot controller

(FC7). For details, refer to page 28.

B SEQ TRANSPORT button

These buttons control recording and playback of the Song

sequence data.

[T] (Top) button

Instantly returns to the beginning of the current Song

(i.e., the first beat of the first measure).

[LL ] (Reverse) button

Press briefly to move back one measure at a time.

[RR ] (Forward) button

Press briefly to move forward one measure at a time.

[I] (Record) button

Press this to call up the Record setup display. (The

button flashes.) Press the [R] (Play) button to start

recording. (The [I] (Record) button lights.)

[J] (Stop) button

Press to stop recording or playback. This button can also

be used when you want to stop Arpeggio playback, even

when Arpeggio is set to continue playback even after the

note is released (Arpeggio hold switch is ON).

[R] (Play) button

Press to start playback or recording of a Song. During

recording and playback, the button flashes at the current

tempo.

C OCTAVE [-] and [+] buttons

Use these buttons to change the octave range of the

keyboard. These buttons also function as Transpose [-] and

[+] buttons. To lower or raise the pitch of the note in semitone

steps, hold down the [SHIFT] button and press the

corresponding [-]/[+] button. To restore the normal octave

setting, press both buttons simultaneously. The buttons light

or flash in different ways depending on the octave setting.

For details, see the Reference Manual PDF document.

D [CONTROL ASSIGN] button

While the parameter assignable to controllers is selected on

the display, press this button and operate the desired

controller for assignment. The controller setting display

appears.

E Touch panel LCD

The LCD indicates the parameters and values related to the

currently selected operation. You can operate by touching

the display.

F Data dial

For editing the currently selected parameter. To increase the

value, turn the dial right (clockwise); to decrease the value,

turn the dial left (counter-clockwise). If a parameter with a

wide value range is selected, you can change the value in

broader strokes by quickly turning the dial.

When PART

[COMMON]

button is on:

When Number A

[1] – [8] buttons

are on:

When Number A

[9] – [16]

buttons are on:

[PERFORMANCE

CONTROL]

Levels of Parts 1 – 8 Levels of Elements/Keys/Operators 1 – 8 of a

selected Part

[PART CONTROL] Levels of Parts 1 – 8 Levels of Parts 9 –

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage 6 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info