Bedienungsanleitung Yamaha Montage 6 (Seite 22 von 86) (Englisch)

652603

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

Controls and Functions

 Left side of Rear Panel

1 [STANDBY/ON] switch

Press to set the power to On or Standby.

2 [AC IN] (AC Power Cord Socket)

Plug the AC power cord supplied with this instrument.

3 [USB TO DEVICE] terminal

Used to connect this instrument to a USB flash memory

device. This lets you save data created on this instrument to

an external USB flash memory device and load data from a

USB flash memory device to the instrument. Save/Load

operations can be performed: [UTILITY]  [Contents] 

[Store/Save] or [Load].

NOTE

• Only USB flash memory devices can be recognized by this

instrument. No other USB devices (such as a hard disk drive, CD-

ROM drive and USB hub) can be used.

• The instrument supports the USB 1.1 to 3.0 standard. However,

note that the transfer speed differs depending on the data type

and the condition of this instrument.

4 [USB TO HOST] terminal

Used to connect this instrument to a computer via a USB

cable, and allows you to transfer MIDI data and audio data

between the devices. Unlike MIDI, USB can handle multiple

ports via a single cable (page 50). For information about

how the MONTAGE handles Ports, see page 50.

NOTE

Audio data sending capability for the instrument is a maximum

32 channels (16 stereo channels) at a sampling frequency of

44.1 KHz; or maximum 8 channels (4 stereo channels) for a

sampling frequency of 44.1 KHz to 192 KHz. Audio data receiving

capability is a maximum 6 channels (3 stereo channels).

 Right side of Rear Panel

5 MIDI [IN], [OUT], [THRU] terminal

MIDI [IN] is for receiving control or performance data from

another MIDI device, such as an external sequencer, letting

you control this instrument from the connected separate

MIDI device.

MIDI [OUT] is for transmitting all control, performance and

playback data from this instrument to another MIDI device,

such as an external sequencer.

MIDI [THRU] is simply for redirecting any received MIDI data

(via MIDI [IN]) to connected devices, allowing convenient

chaining of additional MIDI instruments.

6 FOOT SWITCH [ASSIGNABLE]/[SUSTAIN]

jacks

For connection of an optional FC3/FC4/FC5 Footswitch to the

[SUSTAIN] jack and a FC4/FC5 Footswitch to the

[ASSIGNABLE] jack. When connected to the [SUSTAIN]

jack, the Footswitch controls sustain. When connected to

[ASSIGNABLE], it can control one of various assignable

functions.

NOTE

• The term “FC3” in this Owner’s Manual refers collectively to the

FC3 and other footswitches compatible with the FC3, such as the

FC3A.

• The term “FC4” in this Owner’s Manual refers collectively to the

FC4 and other footswitches compatible with the FC4 such as the

FC4A.

7 FOOT CONTROLLER [1]/[2] jacks

For connection of an optional foot controller (FC7, etc.). This

jack lets you continuously control one of various different

assignable functions for Part edit—such as volume, tone,

pitch, or other aspects of the sound (see the Reference

Manual PDF document).

8 ASSIGNABLE OUTPUT (BALANCED) [L] and

[R] jacks (TRS balanced output)

Line level audio signals are output from this instrument via

these TRS balanced outputs. These outputs are

independent of the main output (at the OUTPUT [L/MONO]/

[R] jacks below), and can be freely assigned to any of the

Drum Part keys or the Parts. This lets you route specific Parts

or sounds for processing with a favorite external effect unit.

The Parts which can be assigned to these jacks are as

follows:

• Drum Part key to which the drum/percussion instrument is

assigned

• Metronome (Click)

• Any Part of a Performance*

* Includes Audio Input Part

For details, see the Reference Manual PDF document.

9 OUTPUT (BALANCED) [L/MONO] and [R]

jacks (TRS balanced output)

Line level audio signals are output via these TRS balanced

outputs. For monophonic output, use only the [L/MONO]

jack.

) [PHONES] (Headphone) jack

This standard stereo phones jack is for connection to a set of

stereo headphones. This jack outputs audio signals identical

to those from the OUTPUT [L/MONO] and [R] jacks.

! A/D INPUT [L/MONO]/[R] jacks

External audio signals can be input via these phone jacks

(1/4" mono phone plug). Various devices such as a

microphone, CD player or synthesizer can be connected to

these jacks and their audio input signal can be sounded as

the Audio Part.

In addition, you can use the special Vocoder feature by

connecting a microphone to this [L/MONO] jack and

inputting your Voice to the microphone.

You can also use the Envelope Follower and ABS (Audio

Beat Sync) features. Envelope Follower is a function for

detecting the volume envelope of the input signal waveform

and modifying sounds dynamically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage 6 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info