Bedienungsanleitung Yamaha Montage 6 (Seite 35 von 86) (Englisch)

652603

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

Quick Guide — Playing the Keyboard

Using the Motion Sequencer

function

The powerful Motion Sequencer feature lets you dynamically

change sounds by operating Parameters depending on

sequences created in advance.

It provides real time control for changing sounds depending

on various sequences such as Tempo, Arpeggio, or the

rhythm of external connected devices.

You can assign up to eight desired Sequence types for one

Lane.

You can also set up to four Lanes corresponding to the

Motion Sequencer function for one Part. Up to eight Lanes

can be used at the same time for the entire Performance.

For the Motion Sequencer function, in addition to being able

to set the Arpeggio playback method, you can also set the

Velocity range, Play Effects, the amount of steps, and so on,

to create your own original grooves.

NOTE

For details about the Motion Sequencer, see the Reference Manual

PDF document.

Turning Motion Sequencer on/off

Press the [MOTION SEQ ON/OFF] button on the front panel

to turn the Motion Sequencer on/off.

Changing Motion Sequences

Press the Number B [1] – [8] buttons to switch among the

Motion Sequence types.

1 Press the [PERFORMANCE CONTROL]

button.

The [PERFORMANCE CONTROL] button lights,

indicating you can select the Motion Sequence types by

using the Number B [1] – [8] buttons.

2 Press the Number B [1] – [8] buttons to

change the Motion Sequences.

Select the desired Motion Sequence type assigned to

each Number B button.

NOTE

For details about Motion Sequence edit, see the Reference

Manual PDF document.

Turning Motion Sequencer on/off for

each Part

Motion Sequencer can be turned on/off for each Part as

follows.

1 Press the [PART CONTROL] button.

The [PART CONTROL] lights, indicating that you can turn

the Motion Sequencer on/off for each Part by using the

Number B [1] – [8] buttons. In this condition, you can

turn the common Motion Sequencer on/off by using the

corresponding ELEMENT/OPERATOR [COMMON]

buttons.

2 Press the Number B [1] – [8] buttons to turn

Motion Sequencer on/off.

When Motion Sequencer is on, the corresponding button

fully lights; when off, the corresponding button lights

dimly. When all Lanes for the Part are in off status, the

corresponding button lamp is off and is not active for this

operation.

NOTE

You can also touch the [MS ON/OFF] on the screen to perform

the same operation.

To turn the common Motion Sequencer on/

off, press the ELEMENT/OPERATOR

[COMMON] button.

When Motion Sequencer is on, the corresponding button

fully lights; when off, the corresponding button lights

dimly. When all Lanes for the Part are in off status, the

corresponding button lamp is off and is not active for this

operation.

NOTE

You can also touch [MS Cmm] on the screen to perform the

same operation.

(2)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage 6 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info