Bedienungsanleitung Yamaha Montage 7 (Seite 60 von 86) (Englisch)

652604

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

Using a Connected Computer

Precautions when using the [USB TO HOST]

terminal

When connecting the computer to the [USB TO HOST]

terminal, make sure to observe the following points. Failing

to do so risks freezing the computer and corrupting or

losing the data.

If the computer or the instrument freezes, restart the

application software or the computer OS, or turn the power

to the instrument off then on again.

NOTICE

• Use an AB type USB cable.

• Before connecting the computer to the [USB TO HOST]

terminal, exit from any power-saving mode of the com-

puter (such as suspend, sleep, standby).

• Before turning on the power to the instrument, connect

the computer to the [USB TO HOST] terminal.

• Execute the following before turning the power to the

instrument on/off or plugging/unplugging the USB cable

to/from the [USB TO HOST] terminal.

- Quit any open application software on the computer.

- Make sure that data is not being transmitted from the

instrument. (Data is transmitted only by playing notes

on the keyboard or playing back a song.)

• While the computer is connected to the instrument, you

should wait for six seconds or more between these oper-

ations: (1) when turning the power of the instrument off

then on again, or (2) when alternately connecting/dis-

connecting the USB cable.

MIDI channels and MIDI ports

MIDI data is assigned to one of sixteen channels, and this

synthesizer is capable of simultaneously playing sixteen

separate Parts, via the sixteen MIDI channels. However,

the sixteen-channel limit can be overcome by using

separate MIDI “ports,” each supporting sixteen channels.

While a single MIDI cable is equipped to handle data over

up to sixteen channels simultaneously, a USB connection

is capable of handling far more—thanks to the use of MIDI

ports. Each MIDI port can handle sixteen channels, and

the USB connection allows up to eight ports, letting you

use up to 128 channels (8 ports x 16 channels) on your

computer.

When connecting this instrument to a computer using a

USB cable, the MIDI ports are defined as follows:

Port 1

The tone generator block in this instrument can recognize

and use only this port. When playing the MONTAGE as a

tone generator from the external MIDI instrument or

computer, you should set the MIDI Port to 1 on the

connected MIDI device or computer.

Port 3

This port is used as the MIDI Thru Port. The MIDI data

received over Port 3 via the [USB TO HOST] terminal will

be re-transmitted to an external MIDI device via the MIDI

[OUT] terminal.

The MIDI data received over Port 3 via the MIDI [IN]

terminal will be re-transmitted to an external device

(computer, etc.) via the [USB TO HOST] terminal. When

using a USB connection, make sure to match the MIDI

transmit port and the MIDI receive port as well as the MIDI

transmit channel and the MIDI receive channel. Make sure

to set the MIDI port of the external device connected to this

instrument according to the above information.

Audio channels

The audio signals of the MONTAGE can be output to the

[USB TO HOST] terminal and the OUTPUT [L/MONO]/[R]

jacks.

When connecting to a computer, use the [USB TO HOST]

terminal. In this case, up to 32 audio channels (16 stereo

channels) are available when the sampling frequency is

44.1 kHz, and up to eight audio channels (four stereo

channels) are available when the sampling frequency is

between 44.1 kHz and 192kHz. The output-to-channel

assignments are made as follows: [EDIT]  [Part Settings]

 “Part Output” in the [General] display.

The audio signals of the MONTAGE can be input from the

[USB TO HOST] terminal and the A/D INPUT [L/MONO]/[R]

jacks.

Up to six channels (three stereo channels) of audio can be

input to the [USB TO HOST] terminal. Set the output level

in the Mixing display or the Performance edit display. The

signals are output to the OUTPUT [L/MONO]/[R] jack (two

channels.) Also, up to two audio channels (one stereo

channel) can be input to the A/D INPUT [L/MONO]/[R]

jacks. The signal is sent to the A/D input part of the

MONTAGE. For more details, see the Reference Manual

PDF document.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage 7 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info