Bedienungsanleitung Yamaha Montage 7 (Seite 64 von 86) (Englisch)

652604

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

Saving/Loading Data

Precautions when using the [USB

TO DEVICE] terminal

This instrument features a built-in [USB TO DEVICE]

terminal. When connecting a USB device to the terminal, be

sure to handle the USB device with care. Follow the

important precautions below.

NOTE

For more information about the handling of USB devices, refer to the

owner’s manual of the USB device.

Compatible USB devices

• USB flash drive

Other USB devices such as a USB hub, computer keyboard

or mouse cannot be used.

The instrument does not necessarily support all

commercially available USB devices. Yamaha cannot

guarantee operation of USB devices that you purchase.

Before purchasing a USB device for use with this instrument,

please visit the following web page:

http://download.yamaha.com/

Although USB devices 1.1 to 3.0 can be used on this

instrument, the amount of time for saving to or loading from

the USB device may differ depending on the type of data or

the status of the instrument.

NOTE

The rating of the USB TO DEVICE terminal is a maximum of 5V/

500mA. Do not connect USB devices having a rating above this,

since this can cause damage to the instrument itself.

Connecting USB device

When connecting a USB device to the [USB TO DEVICE]

terminal, make sure that the connector on the device is

appropriate and that it is connected in the proper direction.

NOTICE

• Avoid connecting or disconnecting the USB device during

playback/recording and file management operations (such as

Save, Copy, Delete and Format), or when accessing the USB

device. Failure to observe this may result in “freezing” of the

operation of the instrument or corruption of the USB device

and the data.

• When connecting then disconnecting the USB device (and

vice versa), make sure to wait a few seconds between the two

operations.

Using USB flash drives

By connecting the instrument to a USB flash drive, you can

save data you’ve created to the connected device, as well

as read data from the connected device.

Maximum number of USB flash drives

allowed

Up to only one USB flash drive can be connected to the

[USB TO DEVICE] terminal.

Formatting USB flash drive

You should format the USB flash drive only with this

instrument. A USB flash drive formatted on another device

may not operate properly.

NOTICE

The format operation overwrites any previously existing data.

Make sure that the USB flash drive you are formatting does not

contain important data.

NOTE

For details about the format, see the Reference Manual PDF docu-

ment.

To protect your data (write-protect)

To prevent important data from being inadvertently erased,

apply the write-protect provided with each USB flash drive. If

you are saving data to the USB flash drive, make sure to

disable write-protect.

Turning off the instrument

When turning off the instrument, make sure that the

instrument is NOT accessing the USB flash drive by

playback/recording or file management (such as during

Save, Copy, Delete and Format operations). Failure to do so

may corrupt the USB flash drive and the data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage 7 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info