Bedienungsanleitung Yamaha Montage 8 (Seite 58 von 86) (Englisch)

652605

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

With a standard MIDI cable (available separately), you can connect an external MIDI instrument, and control it from the

MONTAGE. Likewise, you can use an external MIDI device (such as a keyboard or sequencer) to control the sounds on the

MONTAGE. Below are several different MIDI connection examples; use the one most similar to your intended setup.

NOTE

Either of the built-in interfaces, the MIDI terminals, or the [USB TO HOST] terminal, can be used for MIDI data transmission/reception; however,

they cannot be used at the same time. Select which terminal is to be used for MIDI data transfer by pressing the [UTILITY] button  [Settings]

tab  [MIDI I/O] tab. As you work through the explanations in this chapter, set “MIDI IN/OUT” to “MIDI” since MIDI is used as the example

connection here.

Controlling the MONTAGE from an

external MIDI keyboard or

synthesizer

Use an external keyboard or synthesizer to remotely select

and play the Performances of the MONTAGE.

Controlling an external MIDI

keyboard or synthesizer from the

MONTAGE

This connection lets you sound an external MIDI tone

generator (synthesizer, tone generator module, etc.) by

playing the MONTAGE or playing back Songs from the

MONTAGE. Use this connection when you wish to sound the

other instrument as well as the MONTAGE.

Connecting External MIDI Instruments

MIDI Transmit and Receive Channels

Make sure to match the MIDI Transmit Channel of the

external MIDI instrument with the MIDI Receive Channel of

the MONTAGE. For details on setting the MIDI Transmit

Channel of the external MIDI instrument, refer to the

owner’s manual of that instrument. Each MIDI Receive

Channel number of the MONTAGE corresponds to each

Part number such as Channel 1 for Part 1, Channel 2 for

Part 2, and so on.

MIDI [IN ]

MIDI [OUT ]

MONTAGE

External MIDI keyboard, synthesizer, etc.

Splitting the sound between the MONTAGE

and an external tone generator by MIDI

channel

Using the connection example shown above, you can play

both instruments and have them separately sound different

parts—for example, having your keyboard performance

sound the external instrument while the Song plays the

sounds of the MONTAGE. To use this feature, you must set

the MONTAGE’s transmit channel and the external tone

generator’s receive channel to the same channel number.

Each MIDI transmit channel number of the MONTAGE

corresponds to each Part number such as Channel 1 for

Part 1 or Channel 2 for Part 2. However, you can choose

the desired transmit channel by the following steps.

Press [UTILITY]  [Settings]  [Advanced], then set

“Zone Master” to “ON.” For editing the Part, touch [Part

Settings]  [Zone Settings] to call up the Zone setting

display. Check the MIDI transmit channel in “Zone

Transmit,” then change this parameter, if necessary. When

you wish to sound only the external tone generator, set the

master volume of the MONTAGE down or set “Local

Control” to “off” with the following operation: [UTILITY] 

[Settings]  [MIDI I/O] to call up the MIDI setting display,

then set “Local Control” to “off.” For information on how to

set the MIDI Receive Channel of the external MIDI

instrument, refer to the owner’s manual of that particular

MIDI instrument.

MIDI [OUT]

MIDI [IN]

MONTAGE

External MIDI tone generator such as MOTIF-RACK XS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage 8 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info