Bedienungsanleitung Yamaha Montage (Seite 28 von 86) (Englisch)

707383

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

The MONTAGE has 16 Parts and basic musical instrument

sounds are assigned to each Part. A single set of these

sounds is called a “Performance.” You can change sounds

as desired by selecting the appropriate Performance.

There are three Part types as follows.

Normal Parts (AWM2)

Normal Parts (AWM2) are mainly pitched musical instrument

type sounds (piano, organ, guitar, synthesizer, etc.) that can

be played over the full range of the keyboard.

Normal Parts (FM-X)

Normal Parts (FM-X) are powerful FM Synthesis system

sounds. This sound is played conventionally from the

keyboard, with standard pitches sounding for each key.

Drum Parts

Drum Parts are mainly percussion/drum sounds that are

assigned to individual notes.

Performances can also be divided into two groups as

follows.

Single Part Performances

A Single Part Performance contains only one Part. Select this

if you want to play a single instrument.

Multi Part Performances

A Multi Part Performance contains multiple Parts. Select this

if you want to play sounds of multiple instruments by using

layering and splitting functions.

This instrument features Banks for memorizing

Performances. There are basically four different types of

Banks: Preset, User, Library, and GM. The contained

Performances and features depend on the Bank as

described below.

Preset Banks

The Preset Banks contain a full set of specially programmed

Performances. Performances you’ve edited yourself cannot

be saved in the Preset Banks.

User Banks

The User Banks contain the Performances you have edited

and stored. The User Banks are initially empty.

NOTICE

If a Performance in a User Bank (User Performance) is

overwritten or replaced, that User Performance will be lost. When

you store an edited Performance, be careful not to overwrite any

important User Performances.

Library Banks

The Library Banks contain the Performances you have

added as Libraries. The Library Banks are initially empty.

(A Library can be added by importing a library file.)

GM Bank

The GM Bank contains the Parts allocated according to the

GM standard.

Each of these Banks include Performances organized

according to the Performance type.

NOTE

• For details about Performances, refer to “Basic Structure” in the

Reference Manual PDF document.

• For lists of the Performances, refer to the separate Data List PDF.

Quick Guide — Selecting Performances

Multiple

Performances

One Performance

Part 1 (Piano)

Part 2 (Guitar)

Part 3 (Bass)

Part 4 (Drum)

GM (General MIDI) is a worldwide standard for Voice

organization and MIDI functions of synthesizers and tone

generators. It was designed primarily to ensure that any

song data created with a specific GM device would sound

virtually the same on any other GM device—no matter the

manufacturer or the model. The GM bank on this

synthesizer is designed to appropriately play back GM

song data. However, keep in mind that the sound may not

be exactly the same as played by the original tone

generator.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha Montage

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info