Bedienungsanleitung Yamaha Montage (Seite 38 von 86) (Englisch)

707383

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

Quick Guide — Playing the Keyboard

Using the Super Knob to change

the sound

The Super Knob lets you simultaneously control all

parameter values of the functions assigned to Knobs 1 – 8.

You can create complex sounds by using the Super Knob

together with the Motion Sequencer.

The Super Knob is always available for use. You don’t have

to press the Knob function button or the Knob Assign button

before using the Super Knob.

This section covers the procedure to check the parameter

values changed by the operation of the Super Knob.

1 Press the PART [COMMON] button.

The button lights, indicating that you can make common

settings for all Parts.

2 Press the Knob Assign [ASSIGN] button to

make the button light.

The functions currently assigned to Knobs 1 – 8 and the

parameter values are shown.

3 Turn the Super Knob while playing the

keyboard.

All relevant parameter values simultaneously change

and all assigned functions are applied to the sound.

NOTE

For details about the Knob assignment and the Super Knob

setting, see the Reference Manual PDF document.

Mixing

Each Mixing can contain up to 16 Parts and a separate

Mixing can be created for each Part. You can adjust the

various mixing related parameters for each Part: volume,

pan, etc.

Basic procedure for Mixing

1 Touch the [Mixing] tab on the left side of the

Performance Play display.

The Mixing display appears.

1 Main category for each Part

2 Switching displays between 3-band EQ / 2-band EQ

3 EQ setting for each Part

4 Parameter values for each Part

5 Changing the display for Parts 1 – 16

6 Changing the display for the audio Parts (Parts 9 – 16

are not displayed)

2 Press the [PART CONTROL] button 

Number A [1] – [16] buttons to select the

desired Part for which you want to adjust the

parameter values.

NOTE

By touching [Audio] (6) on the screen, the audio Part are

shown. You can set the parameters relating to the audio data

(AD Part) input from the A/D INPUT [L/MONO]/[R] jack and the

audio data (Digital Part)* input from the [USB TO HOST]

terminal.

*The audio data which is set as “Digital L/R” among device ports

3 Move the cursor to the parameters for each

Part and change the parameter values by

turning the Data dial.

NOTE

• For more detailed parameter settings, press the [EDIT] button

in the Mixing display to open the Edit display.

• For details about the Mixing parameters and Mixing Edit, see

the Reference Manual PDF document.

Controlling the Super Knob by using a foot

controller

You can control the Super Knob by using a foot

controller (FC7).

1 Connect the foot controller (FC7) to the

FOOT CONTROLLER [1]/[2] jack.

2 Move the cursor to the Performance

name on the Performance Play display

and then press the [EDIT] button.

3 Touch the [Control] tab in the left of the

screen

 [Control Number] tab.

4 Set “Foot Ctrl 1” or “Foot Ctrl 2” to

“Super Knob”—depending on which jack

you connected the foot controller (FC7).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha Montage

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info