Bedienungsanleitung Yamaha Montage (Seite 55 von 86) (Englisch)

707383

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

You can set various parameters in the Utility display. In particular, you can set the parameters that apply to the entire system of

this instrument by touching the [Settings] tab. The changes you make in the Utility display are activated once you press the

[EXIT] button to return to the original display. This section describes some useful functions related to the entire system settings.

Setting automatic power-on tasks

You can determine which display is automatically called up

when power is turned on: the Live Set display or the

Performance Play display.

1 Press the [UTILITY] button to call up the

Utility display, then touch [Settings] tab



[System] tab.

2 In [Power on Mode], select “Live Set” (Live

Set display) or “Perform” (Performance Play

display) as the start-up display.

3 Press the [EXIT] button.

This stores the setting and returns to the previous

display.

Setting button lamp behavior

You can control the dimming of the button lamps.

1 Press the [UTILITY] button to call up the

Utility display, then touch [Settings] tab



[System] tab.

2 Set “Half Glow” to “Off,” “1/4,” or “1/2.”

When “Off” is selected, the dimming function is turned

off.

When “1/4” is selected, the brightness of the button in

the dimly lit condition is reduced to 25% of the fully lit

condition. This lighting level is suitable for dark

surroundings, such as a stage.

When “1/2” is selected, the brightness of the button in

the dimly lit condition is reduced to 50% of the fully lit

condition. This lighting level is useful in bright

surroundings (such as outdoors) when it is hard to

distinguish whether the button is dimly lit or off.

3 Press the [EXIT] button.

This stores the setting and returns to the previous

display.

Turning various functions on/off

You can set various functions by touching the [System] tab

on the Utility display.

Turning animation on/off

You can turn the animation of screen transition on/off as

follows.

1 Press the [UTILITY] button to call up the

Utility display, then touch [Settings] tab



[System] tab.

2 Select “ON” or “OFF” in “Animation” to turn

the animation on or off.

3 Press the [EXIT] button.

This stores the setting and returns to the previous

display.

Turning display blur effect on/off

When any display is selected, the display previously

selected is blurred. You can turn the function on/off as

follows.

1 Press the [UTILITY] button to call up the

Utility display, then touch [Settings] tab



[System] tab.

2 Set “Blur” to “ON” or “OFF” to turn the blur

effect on or off.

3 Press the [EXIT] button.

This stores the setting and returns to the previous

display.

Making Global System Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha Montage

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info