Bedienungsanleitung Yamaha Montage (Seite 67 von 86) (Englisch)

707383

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

Display Messages

No read/write authority to the file. Indicates that you do not have the authority to read/write the file.

Now initializing all data… Indicates this synthesizer is restoring the factory-programmed settings.

Now initializing… Indicates that the specified data is being initialized.

Now loading... Indicates that a file is being loaded.

Now receiving MIDI bulk data... Indicates this synthesizer is receiving MIDI bulk data.

Now saving... Indicates that a file is being saved.

Now transmitting MIDI bulk data... Indicates this synthesizer is transmitting MIDI bulk data.

Please connect USB device. Connect the USB device to the [USB TO DEVICE] terminal for audio recording.

Please keep power on. The data is being written to Flash ROM. Never attempt to turn off the power while

data is being written to Flash ROM. Turning the power off while this message is

shown results in loss of all user data and may cause the system to freeze (due to

corruption of data in the Flash ROM). This may also result in the MONTAGE being

unable to properly start up the next time the power is turned on.

Please reboot to enable the new Audio I/O Mode. Please reboot this synthesizer to activate the change of the input/output settings

for audio data.

Please reboot to maintain internal memory. Please reboot this synthesizer to restore the internal memory.

Please stop audio play/rec. The operation you have attempted to execute cannot be done during audio

recording or playback.

Please stop sequencer. The operation you have attempted to execute cannot be done during Song

playback.

Please wait… Indicates this synthesizer is executing the specified operation.

Recall latest edits. If you are editing a Performance and select a different Performance without

storing your edited one, all the edits you’ve made will be erased. If this happens,

you can use Recall to restore the Performance with your latest edits intact.

Redo last recording. Confirms whether you want to redo the operation you have undone.

Sample is protected. The sample data cannot be overwritten.

Sample is too long. The Sample size is too large and the Load operation cannot be executed.

Sample memory full. The Sample memory is full and further Load operations cannot be executed.

Scene stored. The Scene has been stored to one of the [SCENE] buttons.

Song data overload. The Song size is too large for playback.

Song full. The maximum overall number of Songs has been exceeded when executing the

related operations.

Touch the white square. This message appears when you need to touch the displayed white rectangle

during touch panel calibration.

Turn on Memory Switch to memorize ** into this

scene.

When the [Memory] (Memory Switch) is turned on for the function, the

corresponding function information is automatically stored in the currently

selected [SCENE] button.

Undo last recording. Confirms whether you want to undo the most recent recording.

Unsupported USB device. This message appears when an unsupported USB device has been connected.

USB connection terminated. A break in the connection with the USB flash memory device has occurred

because of an abnormal electric current. Disconnect the USB flash memory

device from the [USB TO DEVICE] terminal, and then press any of the panel

buttons.

USB device is full. The USB flash memory device is full and no more data can be saved. Use a new

USB flash memory device, or make space by erasing unwanted data from the

storage device.

USB device is write-protected. This message appears when you have attempted to write to a protected USB

flash memory device.

USB device read/write error. An error occurred while reading or writing to/from a USB flash memory device.

USB device will be formatted. This message appears before the USB device is formatted.

Waveform full. The maximum overall number of Waveforms has been exceeded when executing

the related operations.

LCD indication Description

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha Montage

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info