Bedienungsanleitung Yamaha MOTIF ES7 (Seite 81 von 300) (Englisch)

571272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Editing a Voice

Owner’s Manual

Quick Guide — Advanced Course

Editing a Voice by using the Knobs

The four knobs at the top left of the instrument are not only for tweaking the sound while you perform — you can also use

them to edit a Voice, either in the Voice Play mode or the Voice Edit mode.

●When the [PAN/SEND] indicator is turned on:

●When the [TONE] indicator is turned on:

nThe settings above are applied as offsets to the AEG and FEG settings in the Voice Edit mode.

●When the [ARP FX] indicator is turned on:

●When the [EQ] indicator is turned on:

nThe settings above are applied as offsets to the EQ settings in the [VOICE] → [UTILITY] → [F3] VOICE → [SF1] MEQ display.

●When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):

nIn addition to above functions, Master Effect related parameters (set in the [UTILITY] → [F3] VOICE → [SF2] MEF display) can be assigned to

these four knobs by pressing the [ARP FX] and [EQ] buttons simultaneously. The particular parameters assigned to the four knobs can be set in the

[UTILITY] → [F4] CTL ASN → [SF5] MEF display.

Editing a Voice by using the Control Sliders (CS)

In the Voice mode, the four Control Sliders let you independently adjust the levels of the Elements of a Normal Voice or the

Drum Voice keys. When a Normal Voice is selected, you can adjust the level balance among the four Elements.

nInadvertent use of the sliders may result in no sound. If this occurs, move the sliders upward.

PAN Determines the stereo pan position of the Voice. [VOICE] → Voice selection → [EDIT] → [COMMON] →

[F2] OUTPUT → Pan

Page 190

REVERB Determines the amount of Reverb effect that is applied to the Voice. [VOICE] → Voice selection → [EDIT] → [COMMON] →

[F2] OUTPUT → RevSend

Page 191

CHORUS Determines the amount of Chorus effect that is applied to the Voice. [VOICE] → Voice selection → [EDIT] → [COMMON] →

[F2] OUTPUT → ChoSend

Page 191

TEMPO

Determines the tempo of the Arpeggio assigned to the currently selected Voice.

[VOICE] → Voice selection → [F6] ARP → Tempo Page 189

CUTOFF Raises or lowers the Filter cutoff frequency to adjust the tone brilliance. [VOICE] → Voice selection → [F5] EG → CUTOF Page 189

RESONANCE Boosts or attenuates the level at the area around the Filter cutoff

frequency.

[VOICE] → Voice selection → [F5] EG → RESO Page 189

ATTACK Determines the attack time of the sound. For example, you can adjust a

strings Voice so that the sound gradually swells in volume by setting a

slow attack time – simply turn this knob to the right.

[VOICE] → Voice selection → [F5] EG → ATK (AEG) Page 189

RELEASE Determines the release time of the sound. Turning the knob to the right

sets a long release time and (depending on the selected Voice) lets the

sound sustain after the key is released. To produce a sharp release, in

which the sound abruptly cuts off, set a short release time.

[VOICE] → Voice selection → [F5] EG → REL (AEG) Page 189

SWING Adjusts the swing feel of the Arpeggio playback. [VOICE] → Voice selection → [EDIT] → [COMMON] →

[F3] ARP → [SF3] PLAY FX → Swing

Page 192

GATE TIME Adjusts the Gate Time (length) of the Arpeggio notes. [VOICE] → Voice selection → [EDIT] → [COMMON] →

[F3] ARP → [SF3] PLAY FX → GateTimeRate

Page 192

VELOCITY Adjusts the velocity of the Arpeggio notes. [VOICE] → Voice selection → [EDIT] → [COMMON] →

[F3] ARP → [SF3] PLAY FX → VelocityRate

Page 192

UNITMULTIPLY Adjusts the Arpeggio playback time based on tempo. [VOICE] → Voice selection → [EDIT] → [COMMON] →

[F3] ARP → [SF3] PLAY FX → UnitMultiply

Page 192

LO Determines the amount of boost or attenuation applied to the low

frequency band of the Master EQ.

[VOICE] → Voice selection → [EDIT] → [COMMON] →

[F1] GENERAL → [SF3] MEQ OFS → LOW

Page 190

LO MID Determines the amount of boost or attenuation applied to the low-

midrange frequency band of the Master EQ.

[VOICE] → Voice selection → [EDIT] → [COMMON] →

[F1] GENERAL → [SF3] MEQ OFS → LOW MID

Page 190

HI MID Determines the amount of boost or attenuation applied to the high-

midrange frequency band of the Master EQ.

[VOICE] → Voice selection → [EDIT] → [COMMON] →

[F1] GENERAL → [SF3] MEQ OFS → HIGH MID

Page 190

HI Determines the amount of boost or attenuation applied to the high

frequency band of the Master EQ.

[VOICE] → Voice selection → [EDIT] → [COMMON] →

[F1] GENERAL → [SF3] MEQ OFS → HIGH

Page 190

ASSIGN A Adjusts parameters assigned to these knobs in the [UTILITY] → [F4] CTL ASN → [SF2] ASSIGN display. Page 263

ASSIGN B

ASSIGN 1 Adjusts parameters assigned to these knobs in the [VOICE] → Voice selection → [EDIT] → [COMMON] → [F4] CTL SET display. Page 192

ASSIGN 2

[VOICE] → Voice selection → [EDIT] → Element selection → [F4] AMP → [SF1] LVL/PAN → Level

TIP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info