Bedienungsanleitung Yamaha MOTIF ES7 (Seite 108 von 300) (Englisch)

571272

108

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Creating a Song on the MOTIF ES

108 Owner’s Manual

Quick Guide — Advanced Course

1Press the [SF1] AUDITION button to hear the recorded sample.

2Set the start and end points to determine the actual portion of

the sample to be used.

The “Start” parameter determines the actual start of the sample

(letting you cut unwanted sound at the beginning), while the “End”

parameter determines the end of the sample (letting you cut

unwanted sound at the end).

Pressing [SF3] SET END calls up the following convenient display

for making rhythmically accurate End point edits.

Many commercially available sample/loop CDs include information

on the tempo and meter of speciﬁc loops. Use that information to

make the settings here and ensure proper playback.

After setting the parameters (above right), press the [ENTER]

button to automatically determine the proper End point. Listen

back to the edited sample by pressing the [SF1] AUDITION button.

If you’re satisﬁed with the results, press the [F6] OK button. If

you’re not and you want to continue editing, press [F5] CANCEL.

3Once you’ve trimmed the sample above, you may want to

delete the unneeded portions of the sound (before and after

the Start/End points), to free up memory space. Press the

[SF4] EXTRACT button to delete this excess data.

4Press the [F2] SLICE button to call up the Slice display.

1Set the parameters shown below.

Set other parameters as necessary, referring to page 254.

2Press the [ENTER] button (the display prompts you for

conﬁrmation), then press the [INC/YES] button to execute the

Slice.

3Conﬁrm the result of the operation.

Play the assigned keys in order (C3, C#3, D3, etc.) to hear the

individual slices of the sample.

To hear how the resulting pattern would sound when played by

MIDI sequence data, press the [SF1] AUDITION button.

4If you’re satisﬁed with the results of the Slice operation, press

the [F6] OK button.

If you’re not satisﬁed with the results and want to continue editing,

press the [F5] CANCEL button and attempt the operation again

from step #10-1 above.

9Edit the sample data in the [F1] TRIM display.

AThese parameters determine the portion of the sample that will be used.

BPress the [SF1] AUDITION button to sound the recorded sample

according to the settings in this display.

When the menu indication here is “LP=ST,” the Start (Start Point) and the

Loop (Loop Start Point) will share the same address, meaning that both

of them will be changed simultaneously, even if just one of them is

changed. Pressing the [SF2] button in this condition changes the menu

from “LP=ST” to “LP≠ST.” When the menu indication here is “LP≠ST,” the

Start (Start Point) and the Loop (Loop Start Point) can be changed

independently. When pressing the [SF2] button in this condition, the

address value of the Start will be copied to the one of the Loop, with the

result that both of them share the same address value. The menu

indication also changes from “LP≠ST” to “LP=ST.”

DSee below.

Press the [SF4] EXTRACT button to delete all unnecessary sample data

(located ahead of the Start point and located after the End point).

Press the [F5] and [F6] buttons to zoom in and out of the wave display.

BCDEF

Start

(Start Point)

Loop

(Loop Point)

[SF4] EXTRACT

End

(End Point)

Start

(Start Point)

Loop

(Loop Point)

End

(End Point)

10 Execute the Slice operation in the [F2] SLICE

display.

Measure Determines the number of measures the sample is

recognized as having.

Meter Determines the rhythmic meter the sample is

recognized as having.

11 Return to the Pattern Play mode by pressing the

[PATTERN] button or [EXIT] button.

12 Press the [FF

FF] (Play) button to play the created

Pattern.

13 Save the created Pattern data to a SmartMedia/

USB storage device (page 132) before turning the

power off.

Slice display (before executing Slice)

Slice display (after

executing the Slice)

[ENTER] button

[F5] CANCEL button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info