Record the MIDI sequence data to a Song or Pattern track, referring to the previous instructions in this chapter as needed.
The examples listed below are used as reference.
●Creating a rhythm pattern (using a Drum Voice)
●Creating a bass line (using a Normal Voice)
●Creating a guitar backing (using a Keyboard Mega Voice)
nUp to 16 unique note numbers can be recorded to the Arpeggio track. (This does not apply to multiple instances of the same note number.) If more
than 16 different note numbers have been recorded to the MIDI sequence data, the Convert operation reduces the notes in excess of the limit.
Because of this, be careful to record only up to 16 different notes when you create an Arpeggio, especially when using all four tracks.
■ Convert type which determines how the Song/Pattern data is converted to the Arpeggio data
The Arpeggio data created via the above instructions is stored on internal Flash ROM, meaning that it will not be lost, even
if you turn the power off. When saving the Arpeggio data to a SmartMedia/USB storage device, set the file type (TYPE) to
“All” or “UsrArp” in step #3 described on page 132.
Storing/Saving the created Song/Pattern
The created Song/Pattern data resides on DRAM (page 187). Because data contained in DRAM is lost when the power is turned
off, you should always save any data residing in DRAM to a SmartMedia/USB storage device in the File mode before turning off
the power. Please note that the edited Mixing settings should be stored before saving to a SmartMedia/USB storage device.
Storing the edited Song Mixing/Pattern Mixing settings to internal memory (DRAM)
Press the [STORE] button to enter the Song Mixing Store mode/Pattern Mixing Store mode, then press the [ENTER] button to
execute the Store operation. The Mixing settings are actually stored to a Song/Pattern by executing the Store operation.
The currently edited Mixing program will be lost when selecting a different Song/Pattern or going to a different mode without storing it to the current Song/
Pattern. In addition, simply playing back the Song/Pattern or receiving any MIDI messages from an external MIDI instrument may change the current Mixing
program.
Make sure to store the Mixing program before executing these operations.
Track 1Record a basic rhythm pattern using various drum instruments. ➔ Convert via “Fixed.”
Track 2 - 4Record a different rhythm pattern using a specific drum instrument to each track. ➔ Convert via “Normal.”
Track 1Record a bass line using a specific desired key (root). ➔ Convert via “OrgNote” after the
OrgNotesRoot is set.
Track 2 - 4➔ off
Track 1Record a guitar backing part using a specific desired key (root). ➔ Convert via “Normal.”
Track 2Record a different rhythm using one of the “special” sounds, such as a finger
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Yamaha MOTIF ES7 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.