Bedienungsanleitung Yamaha MOTIF ES7 (Seite 139 von 300) (Englisch)

571272

139

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Using as a Master Keyboard

139

Owner’s Manual

Quick Guide — Advanced Course

Using Zones effectively with external

The two examples below show how to use the Zones with both the internal tone generator and a connected external tone

generator. These instructions correspond to step #6 on the previous page.

nThough all four Zones are used in the example below, you can use any number of Zones (two, three, or four). The settings are made with the MIDISwitch

parameter ([MASTER] → [EDIT] → Zone selection → [F1] TRANS → MIDISwitch) and the TGSwitch parameter ([MASTER] → [EDIT] → Zone selection →

[F1] TRANS → TGSwitch).

nIn these examples, the Zones are assigned to different areas of the keyboard. However, two or more Zones can also be assigned to the same area in a

layer, from the NOTE display ([MASTER] → [EDIT] → Zone selection → [F2] NOTE).

■ Master settings with the Voice mode/Performance mode (Single-timbre tone generator mode)

■ Master settings with the Song mode/Pattern mode (Multi-timbral tone generator mode)

For each Zone, set whether or not MIDI data is transmitted

to the external instrument.

Corresponds to step #6 on the previous page

Determine the MIDI Transmit Channel for each zone.

[MASTER] → [EDIT] → Zone selection → [F1] TRANS → TransCh

For each Zone, set whether or not MIDI data is transmitted

to each Part of the internal tone generator.

[MASTER] → [EDIT] → Zone selection → [F1] TRANS → TGSwitch

Determine the note range of each zone.

[MASTER] → [EDIT] → Zone selection → [F2] NOTE → NoteLimitH

[MASTER] → [EDIT] → Zone selection → [F2] NOTE → NoteLimitL

[MASTER] → [EDIT] → Zone selection → [F1] TRANS → MIDISwitch

Internal tone generator (Single Timbre)

External tone generator (Multi-timbral)

Set the MIDI receive channel for each part.

MIDI Transmit

Channel 1

MIDI Transmit

Channel 2

MIDI Transmit

Channel 3

MIDI Transmit

Channel 4

[UTILITY] → [F5] MIDI → [SF1] CH → BasicRcvCh = 01

For each Zone, set whether or not MIDI data is transmitted

to the external instrument.

Corresponds to step #6 on the previous page

Determine the MIDI Transmit Channel for each zone.

[MASTER] → [EDIT] → Zone selection → [F1] TRANS → TransCh

For each Zone, set whether or not MIDI data is transmitted

to each Part of the internal tone generator.

[MASTER] → [EDIT] → Zone selection → [F1] TRANS → TGSwitch

Determine the note range of each zone.

[MASTER] → [EDIT] → Zone selection → [F2] NOTE → NoteLimitH

[MASTER] → [EDIT] → Zone selection → [F2] NOTE → NoteLimitL

[MASTER] → [EDIT] → Zone selection → [F1] TRANS → MIDISwitch

Internal tone generator (Multi-timbral)

External tone generator (Multi-timbral)

Set the MIDI receive channel for each part.

MIDI Transmit

Channel 1

Part 05

Receive

Channel 1

Part 13

Receive

Channel 2

MIDI Transmit

Channel 2

MIDI Transmit

Channel 3

MIDI Transmit

Channel 4

[SONG] → [MIXING] → [EDIT] → Part selection →

[F1]VOICE → [SF2]MODE → ReceiveCh

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 139

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info