Bedienungsanleitung Yamaha MOTIF ES7 (Seite 142 von 300) (Englisch)

571272

142

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Computer applications

Setting up

142 Owner’s Manual

Although the MOTIF ES is a powerful instrument in its own right and can effectively be used by itself for music creation and

production, it is also designed for easy and comprehensive interfacing with a computer system. In this section, we’ll show you

how set up the instrument with a computer (via USB) and how to use it with the software provided on the included CD-ROM,

“Tools for MOTIF ES.”

nFor information on how to install each software and the minimum system requirements, refer to the separate Installation Guide.

nAbout how to use each software, refer to the relevant documentation (PDF manual or on-line Help).

nBy installing an optional mLAN16E board and using the mLAN connection with your computer, you can transfer both audio and MIDI data between the

devices over the same mLAN cable. See page 39.

Setting up

•

For software on the included “Tools for MOTIF ES” CD-ROM

(Voice Editor, USB MIDI driver, etc.), refer to the separate

Installation Guide.

• For other software, refer to the relevant manual or

documentation.

nYou can also connect the instrument to a computer by using MIDI

cables (page 40) or IEEE1394 cable (page 39).

•

For a computer running Windows, the Add New Hardware

Wizard may appear on the computer display. In this case,

install the driver following the on-screen instructions. For

details, refer to the separate Installation Guide.

•For a Macintosh computer, install OMS then install the USB

MIDI driver. Refer to the separate Installation Guide.

nIf you have installed the optional mLAN16E and are connecting the

instrument to a computer with an IEEE 1394 cable, you’ll need to install

the mLAN driver.

•To install software from the included “Tools for MOTIF ES”

CD-ROM (Voice Editor, SQ01, etc.), refer to the separate

Installation Guide.

•To install other software, refer to the relevant manual or

documentation.

The settings in the Utility mode are stored as system settings to internal

Flash ROM. Never attempt to turn off the power while data is being written

to Flash ROM (while a “Please keep power on” message is shown). Turning

the power off in this state results in loss of all user data and may cause the

system to freeze (due to corruption of data in the Flash ROM). This may

also result in the MOTIF ES being unable to properly start up the next time

the power is turned on.

Quick Guide — Computer applications

1Confirm the minimum system requirements of

the software you wish to use.

2Connect the computer to the instrument with a

USB cable.

3Start the computer and insert the “Tools for

MOTIF ES” CD-ROM into the CD drive of the

computer.

4Turn the power of the MOTIF ES on.

5Install the USB MIDI driver to the computer.

USB

TO HOSTTO DEVICE

USB connector

A type USB cable B type

Rear panel

USB TO HOST

connector

6Install the desired software to the computer.

Set the MIDI IN/OUT parameter to “USB”

([UTILITY] →→

→→ [F5] MIDI →→

→→ [SF4] OTHER), then

press the [ENTER] button to store the Utility

settings.

EDIT

COMPARE SCENE STORE

SET LOCATE

JOB STORE

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 142

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info