Bedienungsanleitung Yamaha MOTIF ES7 (Seite 149 von 300) (Englisch)

571272

149

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Controlling a computer from the instrument

149

Owner’s Manual

Quick Guide — Computer applications

■ Cubase SX

1Pull down the [Devices] menu and select [Device Setup]

to call up the “Device Setup” window.

Click the [Add/Remove] tab and add the “Mackie Control.”

3Select the added Mackie Control device and click the

[Setup] tab.

4When setting the Port to “4,” for example, in step #3 of

“Setting up on the MOTIF ES,” set the MIDI Input to

“YAMAHA USB IN 0-4” and the MIDI Output to

“YAMAHA USB OUT 0-4.”

nThe functions of buttons on the Mackie Control are assigned to the

buttons of the MOTIF ES, with the exception of UserA and UserB

(FootSw) which are not supported by the MOTIF ES.

■ SONAR

1Pull down the [Options] menu and select [MIDI Devices]

to call up the “MIDI Devices” window.

2When setting the Port to “4” for example in step #3 of

“Setting up on the MOTIF ES,” add “YAMAHA USB IN

0-4” to the “Inputs” and add “YAMAHA USB OUT 0-4” to

the “Outputs.”

3Pull down the [Options] menu and select [Control

Surfaces] to call up the Control Surface window.

4Click the “New” icon, select “Mackie Control,” then set

the Input Port to “YAMAHA USB IN 0-4” and the Output

Port to “YAMAHA USB OUT 0-4” (for example, when

setting the Port to “4” in step #3 of “Setting up on the

MOTIF ES”).

■ Digital Performer

1Pull down the [Basics] menu and select [Control

Surface Setup] to call up the “Control Surface” window.

2Select “Mackie Control” in the Driver section.

If Mackie Control is not available here, see the

supplementary instructions below.

3In the box for setting “Unit” and “MIDI,” select “Mackie

Control” in the “Unit” section and select the MIDI port in

the “MIDI” section.

When you cannot select “Mackie Control” in step #2:

1) Download the Mackie Control Plug-in software from

“www.motu.com” and save it to your hard disk.

2) Move the Mackie Control ﬁle to the “Plug-ins” folder

contained in the folder to which Digital Performer has

been installed.

3) Start Digital Performer.

* Mackie Control is the trademark of Mackie Designs, Inc.

■ Logic

When turning on the power of the MOTIF ES before

starting Logic:

1Set the software to be controlled to “Logic” in the Utility

mode, then enter the Remote Control mode.

2Start Logic on the computer.

Logic automatically recognizes the MOTIF ES and

performs the required settings.

When starting Logic before turning on the power of the

MOTIF ES:

1Start Logic on the computer, then turn the power to the

MOTIF ES on.

If you have already set the software to be controlled to

“Logic” in the Utility mode, you need not perform step #2

because Logic automatically recognizes the MOTIF ES

when this step is performed.

2Set the software to be controlled to “Logic” in the Utility

mode, then enter the Remote Control mode.

Logic automatically recognizes the MOTIF ES and

performs the required settings.

If for some reason Logic fails to recognize the MOTIF ES,

follow the instructions below.

1) Select [Option] →→

→→ [Preference] →→

→→ [Control Surface] →→

→→

[Install] from the menu.

2) Scan Logic Control on the window called up in step #1).

When the scanning is successful, the Logic recognizes the

MOTIF ES and performs the required settings automatically.

If Logic still fails to recognize the MOTIF ES even after

performing the above instructions, follow the instructions

below.

1) Select [Option] →→

→→ [Preference] →→

→→ [Control Surface] →→

→→

[Install] from the menu.

2) Add Logic Control on the window called up in step #1).

3) Specify the Input Port and Output Port on the

CONTROL SURFACE SETUP window called up in step

#2).

* Logic Control is the registered trademark of Emagic, Inc.

■ SQ01

For information about how to set the MIDI port, refer to the

separate Installation Guide. For information on using Remote

Control, follow the instructions below.

1Select [Setup] →→

→→ [Remote Control] to call up the

Remote Control Setup window.

2Select “01X” as mode, then set the Input Device/Output

Device to the appropriate port number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info