Bedienungsanleitung Yamaha MOTIF ES7 (Seite 199 von 300) (Englisch)

571272

199

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Voice Mode

Voice Edit mode Normal Voice Edit Element Edit

199

Owner’s Manual

FCenterKey This indicates that the central note for Cutoff Sensitivity above is C3. At C3, the tone remains unchanged. For other

notes played, the Cutoff Frequency varies according to the particular note and the Cutoff Sensitivity setting. Keep in

mind that this is for display purposes only; the value cannot be changed.

Settings: C -2 ~ G8

EGTimeSens

(EG Time Sensitivity) Determines the degree to which the notes (speciﬁcally, their position or octave range) affect the Filter EG times of the

selected Element. The basic speed of change for the FEG is at the note speciﬁed in the Center Key (next

parameter). A positive setting will cause slower changes for lower notes and faster changes for higher notes.

A negative setting will have the opposite effect.

Settings: -64 ~ 0 ~ +63

FCenterKey Determines the central note or pitch for the Key Follow effect on Filter EG. Depending on the EG Time Sensitivity

parameter above, the further away from the Center Key the keys are played, the more the time of the Filter EG

deviates from the normal. When the Center Key note is played, the FEG behaves according to its actual settings.

The Filter change characteristics for other notes will vary in proportion to the EG Time settings.

Settings: C -2 ~ G8

nYou can also set the Center Key directly from the keyboard, by holding down the [INFORMATION] button and pressing the

desired key. Refer to the Basic Operation section, page 53.

[SF5] SCALE (Filter Scaling) Filter Scaling controls the ﬁlter cutoff frequency according to the positions of the notes on the keyboard. You can

divide the entire keyboard by four break points, and assign different offset values of Cutoff Frequency to them

respectively. Refer to the setting example on page 211.

Settings: BREAK POINT 1 ~ 4: C-2 ~ G8

OFFSET 1 ~ 4: 128 ~ 0 ~ +127

nYou can also set the Break Point directly from the Keyboard, by holding down the [INFORMATION] button and pressing the

desired key. Refer to the Basic Operation section, page 53.

[F4] AMP (Amplitude)

[SF1] LVL/PAN (Level/Pan) This display not only lets you make basic Level and Pan settings for each individual Element, it also gives you some

detailed and unusual parameters for affecting Pan position.

Level Determines the output level for the selected Element.

Settings: 0 ~ 127

Pan Determines the stereo Pan position for the selected Element. This will also be used as the basic Pan position for the

Alternate, Random and Scale settings.

Settings: L63 (Left) ~ C (Center) ~ R63 (Right)

AlternatePan Determines the amount by which the sound of the selected Element is panned alternately left and right for each note

you press. The Pan setting (above) is used as the basic Pan position.

Settings: L64 ~ 0 ~ R63

RandomPan Determines the amount by which the sound of the selected Element is panned randomly left and right for each note

you press. The Pan setting is used as the Center Pan position.

Settings: 0 ~ 127

ScalingPan Determines the degree to which the notes (speciﬁcally, their position or octave range) affect the Pan position, left

and right, of the selected Element. At note C3, the main Pan setting (above) is used for the basic Pan position.

Settings: -64 ~ 0 ~ +63

[SF2] VEL SENS

(Velocity Sensitivity)

From this display you can determine how the Amplitude (volume) EG responds to velocity.

EG Time,

Segment Determines the velocity sensitivity of the AEG’s Time parameters.

Select the Segment ﬁrst, then set its Time parameter. Positive Time settings will play back the speciﬁed Segment

faster in proportion to the played velocity and negative values will play it back slower.

Settings: EG Time -64 ~0 ~+63

Settings: Segment: atk, atk+dcy, dcy, atk+rls, all

atk (attack) ............................ EG Time Value affects Attack time.

atk+dcy (attack + decay)...... EG Time Value affects Attack/Decay1 time.

dcy (decay) ........................... EG Time Value affects Decay time.

atk+rls (attack + release) ...... EG Time Value affects Attack/Release time.

all .......................................... EG Time Value affects all AEG Time parameters.

Center key

Higher

range

Lower

range

Large

Small

–

Amount of cutoff

frequency change

Positive value

Higher rangeLower range

Slower speed

Faster speed

+63

+30

-40

Negative value

When Cutoff Sensitivity is set to 100

Cutoff Sensitivity and Center Key EG Time Sensitivity and Center Key

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 199

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info