In this mode, you can set up mixing data for your songs, and set various parameters for the tone generator parts — including the desired Voice,
as well as its level, pan, EQ, effect and other settings.
Pressing the [F6] button can switch between the display for the Parts 1 - 16 to which the internal Voices are assigned, the display for Multi Plug-
in Parts (17 - 32) to which the PLG100-XG voices are assigned and the display for Plug-in Parts (PLG1 - 3) to which the Plug-in Voices of the
single part Plug-in board are assigned.
Song Mixing parameters are not actually part of the Song sequence data in each track, but rather are settings for the tone generator, as it is
played back by the Song data. As such, the Song Mixing parameter settings are not recorded to the Song tracks.
Parameter settings made in the Song Mixing mode and Song Mixing Edit mode should be stored to internal memory (DRAM) as part of the Song data. In
addition, make sure to save the entire Song data (including the Mixing settings) to the SmartMedia/USB storage device, since the data in DRAM is stored
only temporarily (page 187).
nParameter settings in the Song Mixing mode and Song Mixing Edit mode can be stored as a template to internal Flash ROM, as wellas being stored as part
of a Song. See page 104 for details.
02: Split Song To PatternThis Job allows you to copy a part of the current Song –
all 16 tracks over a specific range of measures – to a
specific Pattern, letting you use Song data to create a
Pattern.
This Job overwrites any data already
existing in the destination Pattern and
section.
Copy SampleWhen this box is checkmarked, sample voices assigned to each track in the source Song are copied to the split
destination Pattern as Sample Voices and are assigned to the corresponding tracks in that Pattern. This checkbox
has no effect if no Sample Voices are assigned to the tracks in the source Song.
03: Clear SongThis Job deletes all data from the selected Song or all Songs, including the Sample Voices and Mixing Voices.
04: Song NameThis Job lets you assign a name to the selected Song. See “Basic Operation” on page 53.
Song Mixing mode[SONG] → Song selection → [MIXING]
[F1] VOL/PAN
From this display you can set the Pan and Volume for each Part (track).
nYou can select a Part by moving the cursor or by using the NUMBER buttons while the [TRACK SELECT] indicator is on (page 58).
PANDetermines the stereo pan position for each part.
VOLUMEDetermines the volume for each Part, allowing you to set the optimum level balance of all the Parts.
Settings:0~127
nYou can also adjust the Volume by using the Control Sliders. See page 130 for details.
[F2] VOICE
From this display you can select a voice for each Part. Sample Voices and Mixing Voices can also be selected.
nYou can select a Part by moving the cursor or by using the NUMBER buttons while the [TRACK SELECT] indicator is on (page 58).
nThe Category Search function can also be used to select Voices here, except for Voices of the Multipart Plug-in Parts 17 - 32 (when the PLG100-XG has been installed), Sample
Voices, and Mixing Voices.
[F3] EFFECT
Pressing the [F3] EFFECT button in the Song Mixing mode calls up the [SONG] → [MIXING] → [EDIT] → [COMMON] → [F6] EFFECT display in the Song Mixing
Edit mode. From this display, you can set the effect related parameters for the current Song. See page 235 for details.
[F4] EF SEND (Effect Send)
From this display you can make basic effect settings for each Part — Send Level for the System Effect (Reverb, Chorus) as well as the Dry Level for Insertion
Effects.
nFor information on the effect connections in the Song mode, see page 180.
[F5] VCE ED (Mixing Voice Edit)
Press the [F5] VCE ED button in the Song Mixing mode to enter the Mixing Voice Edit mode. Press the [EXIT] button to return to the original display in the Song
Mixing mode. For details, see page 105.
Normal Voices can be edited specifically for use with the Song/Pattern modes, creating a dedicated “Mixing Voice.” Refer to “Mixing Voice mode” on page 249 for
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Yamaha MOTIF ES7 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
