Bedienungsanleitung Yamaha MOTIF ES7 (Seite 243 von 300) (Englisch)

571272

243

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Pattern Mode

Pattern Record mode Pattern Record Standby mode

243

Owner’s Manual

Pattern Record Standby mode

[F2] COPY This display lets you copy all Pattern chain events from

a speciﬁed range of measures (source) to a destination

location.

After specifying the source range in measures, the top

measure of the destination location, and

NumberOfTimes (number of times the data is copied),

press the [ENTER] button to execute the Copy

operation.

This operation overwrites any events already existing at the destination.

[F3] SONG This function converts the Pattern chain data to Song data (standard MIDI format) and places the results in the

normal Song tracks.

After specifying the desired destination Song and measure number to which the converted data is to be copied,

then press the [ENTER] button to execute.

This operation overwrites any data already existing at the destination range.

Pattern Record mode [PATTERN] → Pattern selection → [I] (Record)

[F1] SETUP

Type (Recording Type) Determines the recording method.For information on each method, refer to page 168 in the Basic Structure section.

Settings: replace, overdub, step

nUnlike in the Song Record mode, Punch recording is not available for Pattern recording.

Loop Turns loop recording ON or OFF.

When ON, the phrase will play repeatedly during real-time recording. This can be handy when recording drum parts

(page 168), allowing you to add different instruments on each pass.

When OFF recording stops after one pass through the phrase.

Settings: on, off

Quantize Same as in the Song Record mode. See page 222.

Event Same as in the Song Record mode. See page 223.

 (Tempo) Determines the Pattern tempo.

Settings: 001.0 ~300.0

nUnlike in Songs, Scene track and Tempo track are not available for Patterns.

Meas (Measure) Determines the measure from which Pattern recording will be started.

[F2] VOICE

From this display you can set Voice-related parameters for the selected track. The settings made here affect the tone generator parts whose MIDI receive

channels match the MIDI transmit channel of the song track. The Voice set here becomes the phrase Voice (page 167).

Parameters are the same as in the Song Record mode. See page 223.

[F3] ARP (Arpeggio)

From this display you can set parameters related to the Arpeggio of the recording track.

Parameters are the same as in the Song Record mode. See page 223.

[F4] REC ARP (Record Arpeggio)

From this display you can determine whether the sequence data played by Arpeggio is recorded to the Pattern track or not.

Parameters are the same as in the Song Record mode. See page 223.

[F5] CLICK

Pressing the [F5] button lets you turn the click sound (metronome) on/off for recording.

Source range

Top measure of destination

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 243

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info