Bedienungsanleitung Yamaha MOTIF ES8 (Seite 277 von 300) (Englisch)

571273

277

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Appendix

Display Messages

277

Owner’s Manual

Display Messages

LCD Indication Explanation

Are you sure ? [YES]/[NO] Conﬁrms whether you want to execute a speciﬁed operation or not. Press [INC/YES] or [DEC/NO] as required.

Arp memory full The internal memory for Arpeggio data is full, preventing storing the recorded sequence data as an Arpeggio.

Arpeggio type stored The current Arpeggio type has been stored to one of the [SF1] - [SF5] buttons.

Bad disk or card. The SmartMedia or USB storage device is unusable. Format the SmartMedia or USB storage device and try again.

Bulk protected. Bulk data was received when RcvBulk was set to “protect.” (See page 264.)

Can’t ﬁnd associated ﬁles. The related voice ﬁle cannot be found when loading an AKAI S1000/S3000 format ﬁle.

Can’t undo OK? [YES]/[NO] When certain Song/Pattern Jobs are executed, internal memory becomes too full for use of the Undo operation. Press

[INC/YES] if this is OK, or [DEC/NO] to abort the operation. Try again after erasing unwanted Songs, Patterns, or User

phrases.

Choose user phrase. You have attempted to record a Pattern track to which a preset phrase is assigned. If you wish to use a preset phrase as

raw material for Pattern recording, copy it to a User phrase before recording.

Completed. The speciﬁed load, save, format, or other Job has been completed.

Copy protected. You have attempted to export or save a copy-protected digital audio source.

Device number is off. Bulk data cannot be transmitted/received since the device number is off.

Device number mismatch. Bulk data cannot be transmitted/received since the device numbers don’t match.

Digital in unlocked. Digital input signal of the AIEB2 is unlocked (not properly received or recorded).

Disk or card full. The SmartMedia or USB storage device is full and no more data can be saved. Use a new SmartMedia or USB storage

device, or make space by erasing unwanted data from the SmartMedia or USB storage device.

Disk or card not ready. A SmartMedia or USB storage device is not properly inserted in or connected to the MOTIF ES.

Disk or card read/write error. An error occurred while reading or writing to/from a SmartMedia or USB storage device.

Disk or card write protected. The SmartMedia or USB storage device is write protected, or you have attempted to write to a read-only medium such as

CD-ROM.

Effect plug-in is not in slot 1. The Effect Plug-in board does not work because it has not been installed to slot 1. The Effect Plug-in board should be

installed to slot 1.

Executing... A format operation or Job is being executed. Please wait.

File already exists. A ﬁle having the same name as the one you are about to save already exists.

File not found. The ﬁle of the speciﬁed type cannot be found on the SmartMedia/USB storage device

Folder is too deep. Directories below this level cannot be accessed.

Illegal check box. No check boxes have been checked in a Sequencer track Job which requires a check box selection. Check the

appropriate check box.

Illegal ﬁle The ﬁle speciﬁed for loading is unusable by the MOTIF ES or cannot be loaded in the current mode.

Illegal ﬁle name. The speciﬁed ﬁle name is invalid. Try entering a different name.

Illegal input. An invalid input or value has been speciﬁed. Check the input method or value.

Illegal measure. An invalid measure number has been speciﬁed in the Song/Pattern mode. Select the measure again.

Illegal phrase number. An invalid phrase number has been speciﬁed in the Pattern mode. Select the phrase again.

Illegal sample data. The sample ﬁle speciﬁed for loading is unusable by the MOTIF ES.

Illegal track number. An invalid track number has been speciﬁed in the Song/Pattern mode. Select the track again.

Incompatible USB device A USB device which cannot be used with the MOTIF ES has been connected to the USB TO DEVICE connector.

Meter mismatch In the Pattern Job mode, the meter (time signature) of the destination Pattern is different from the meter of the source

Pattern.

MIDI buffer full. Failed to process the MIDI data because too much data was received at one time.

MIDI checksum error. An error occurred when receiving bulk data.

MIDI data error. An error occurred when receiving MIDI data.

Mixing stored In the Song/Pattern mode, the Mixing settings have been loaded from the ﬁle.

Mixing Voice full The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the maximum capacity.

Multi plug-in is not in slot 3. The Multi-Part Plug-in board does not work because it has not been installed to slot 3. The Multi-Part Plug-in board

should be installed to slot 3.

No data. When a Song/Pattern Job is executed, the selected track or range contains no data. Select an appropriate track or

range. In addition, this message appears when a Job related to a Mixing Voice cannot be executed because the

speciﬁed Mixing Voice is not available.

No DIMM Memory Installed. An appropriate pair of expansion DIMMs is not properly installed, or the pair is not properly matched (page 289).

No F7 (End of Exc.)

Exclusive data has been entered or changed without the necessary “End of Exclusive” byte (F7). Make sure F7 is included.

Yamaha MOTIF ES8 Seite 277

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info