Bedienungsanleitung Yamaha MOTIF ES8 (Seite 3 von 300) (Deutsch)

571273

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

IMPORTANT SAFETY INSTRUCTIONS

INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,

AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.

WARNING-

When using any electrical or electronic product, basic

precautions should always be followed. These precautions include, but

are not limited to, the following:

Read all Safety Instructions, Installation Instructions, Special

Message Section items, and any Assembly Instructions found in this

manual BEFORE making any connections, including connection to the

main supply.

Do not attempt to service this product beyond that described in the

user-maintenance instructions. All other servicing should be referred to

qualiﬁed service personnel.

Main Power Supply Veriﬁcation: Yamaha products are

manufactured speciﬁcally for the supply voltage in the area where they

are to be sold. If you should move, or if any doubt exists about the

supply voltage in your area, please contact your dealer for supply

voltage veriﬁcation and (if applicable) instructions. The required supply

voltage is printed on the name plate. For name plate location, please

refer to the graphic found in the Special Message Section of this

manual.

DANGER

-Grounding Instructions: This product must be grounded

and therefore has been equipped with a three pin attachment plug. If

this product should malfunction, the ground pin provides a path of low

resistance for electrical current, reducing the risk of electrical shock. If

your wall socket will not accommodate this type plug, contact an

electrician to have the outlet replaced in accordance with local

electrical codes. Do NOT modify the plug or change the plug to a

different type!

WARNING:

Do not place this product or any other objects on the

power cord or place it in a position where anyone could walk on, trip

over, or roll anything over power or connecting cords of any kind. The

use of an extension cord is not recommended! If you must use an

extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG.

NOTE: The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electrician.

Ventilation: Electronic products, unless speciﬁcally designed for

enclosed installations, should be placed in locations that do not

interfere with proper ventilation. If instructions for enclosed installations

are not provided, it must be assumed that unobstructed ventilation is

required.

Temperature considerations: Electronic products should be

installed in locations that do not seriously contribute to their operating

temperature. Placement of this product close to heat sources such as;

radiators, heat registers etc., should be avoided.

This product was NOT designed for use in wet/damp locations and

should not be used near water or exposed to rain. Examples of wet /

damp locations are; near a swimming pool, spa, tub, sink, or wet

basement.

This product should be used only with the components supplied or;

a cart,rack, or stand that is recommended by the manufacturer. If a cart,

rack, or stand is used, please observe all safety markings and

instructions that accompany the accessory product.

10.

The power supply cord (plug) should be disconnected from the

outlet when electronic products are to be left unused for extended

periods of time. Cords should also be disconnected when there is a

high probability of lightning and/or electrical storm activity.

11.

Care should be taken that objects do not fall and liquids are not

spilled into the enclosure through any openings that may exist.

12.

Electrical/electronic products should be serviced by a qualiﬁed

service person when:

a. The power supply cord has been damaged; or

b. Objects have fallen, been inserted, or liquids have been spilled

into the enclosure through openings; or

c. The product has been exposed to rain; or

d. The product does not operate, exhibits a marked change in

performance; or

e. The product has been dropped, or the enclosure of the product

has been damaged.

13.

This product, either alone or in combination with an ampliﬁer

and headphones or speaker/s, may be capable of producing sound

levels that could cause permanent hearing loss. DO NOT operate for a

long period of time at a high volume level or at a level that is

uncomfortable. If you experience any hearing loss or ringing in the ears,

you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

14.

Some Yamaha products may have benches and/or accessory

mounting ﬁxtures that are either supplied as a part of the product or as

optional accessories. Some of these items are designed to be dealer

assembled or installed. Please make sure that benches are stable and

any optional ﬁxtures (where applicable) are well secured BEFORE

using. Benches supplied by Yamaha are designed for seating only. No

other uses are recommended.

PLEASE KEEP THIS MANUAL

92-469-3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES8 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info