Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 16 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Audition Phrase Playback

MOTIF-RACK XS Owner’s Manual

Basic Structure

Reference

Voice

Multi Utility

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

Audition Phrases let you quickly and easily check the sound of the Voice you’ve selected. This is convenient when going through the

wide variety of Voices available and trying to select the most suitable one for your song or performance.

Listening to the Audition Phrase of

the desired Voice

Press the [VOICE] button.

The [VOICE] lamp lights and the Voice Play display of the

Voice mode appears.

Select the desired Voice by using the Cursor

buttons and Encoder knob.

Press the [AUDITION] button.

The [AUDITION] lamp ﬂashes and the Audition Phrase of

the selected Voice will play back.

When another Voice is selected during playback, the

Audition Phrase of the new Voice automatically starts.

nIf pressing the [AUDITION] button produces no sound, follow the

instructions titled “When pressing the [AUDITION] button produces

no Audition Phrase” below.

Press the [AUDITION] button again to stop the

Audition Phrase playback.

The Audition Phrase is available also in the Voice Edit

mode (page 31) and Multi mode (page 35). In the Multi

mode, you can hear the Audition Phrase of the Voice

assigned to the current Part.

When pressing the [AUDITION]

button produces no Audition Phrase:

If pressing the [AUDITION] button produces no sound, make

sure the setting is appropriate by following the instructions

below.

Press the [UTILITY] button.

The Utility Select window appears.

Select “General” by using the Encoder knob and

Cursor buttons, then press the [ENTER] button.

Press the Cursor [L]/[M] to call up the third page

of the Utility General window, then select

“Audition Button.”

Set the “Audition Button” parameter to “audition

sw” by turning the Encoder knob.

This setting enables the [AUDITION] button for playback of

the Audition Phrase.

Audition Phrase Playback

Playback variation of the Audition Phrase

The type and pitch of the Audition Phrase assigned to the each

Voice can be changed as desired by setting the following

parameters in the Play Mode display (page 66) of Voice Common

Edit.

• Audition No. (Audition Phrase number)

Determines the type of the Audition Phrase.

• Audition Note Shift

Shifts the playback notes of the Audition Phrase in semitones.

• Audition Vel Shift (Audition Phrase Velocity Shift)

Increases or decreases the velocities for the playback notes of

the Audition Phrase.

n Some Audition Phrases include Control Change messages which

control the tonal characteristics of the Voice.

n When the “Audition Button” parameter is set to “audition sw,” holding

the [AUDITION] button for two seconds or more calls up the Play Mode

display (page 65) containing the above parameters.

n Even within the same Audition Phrase type, the playback sound will

differ depending on the Arpeggio setting of the each Voice or Part in

the Multi.

(This display can be called up from the Voice mode.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info