Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 19 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Connecting to a Computer and MIDI Device

MOTIF-RACK XS Owner’s Manual

Basic Structure

Voice

MultiUtility

Reference

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

Install the downloaded AI Driver to the computer.

For instructions on installing, refer to the online Installation

Guide included in the downloaded ﬁle package. When

connecting the MOTIF-RACK XS to a computer in the

Installation procedure, connect the IEEE1394 cable to the

mLAN terminal of the MOTIF-RACK XS and the IEEE1394

terminal of the computer as shown below.

Be sure to connect the IEEE1394 (mLAN) cable plug to the

mLAN jack with the correct orientation.

n For optimum results, use an IEEE1394 cable shorter than 4.5 meters.

Make sure that the mLAN terminal of the MOTIF-

RACK XS is enabled for MIDI communication.

Press the [UTILITY] button to call up the Utility Select

window, then select “MIDI” in the display. Then, press the

[ENTER] button or the Encoder knob to call up the MIDI

display (page 99) and set the “MIDI In/Out” parameter to

“mLAN.”

Make sure that the mLAN terminal of the MOTIF-

RACK XS is enabled for audio communication.

When transmitting audio signals via the mLAN terminal, set

the Output Select parameter of the MOTIF-RACK XS.

When receiving audio signals via the mLAN terminal, set

the mLAN audio input part parameters of the MOTIF-RACK

XS. For details, see “Audio signal transmission/reception”

in the section “Signal ﬂow of audio and MIDI data via an

IEEE1394 cable” on page 20.

Press the [STORE] button to store this setting.

What you can do with the IEEE1394 connection

You can integrate the MOTIF-RACK XS with DAW software on a

computer by connecting the mLAN equipped MOTIF-RACK XS

(which the optional mLAN16E2 is installed) to a computer in a

peer-to-peer arrangement. For details, see below.

• Transfer data of multiple audio channels between the MOTIF-

RACK XS and the computer (up to 16 channels from the MOTIF-

RACK XS to the computer and up to 6 channels from the computer

to the MOTIF-RACK XS).

• While playing back sequence software, you can simultaneously

record the sounds of the MOTIF-RACK XS back to the sequence

software as audio data.

• Monitor via the MOTIF-RACK XS the audio output from the

computer and the audio output from the MOTIF-RACK XS.

• Use Cubase 4/ Cubase AI 4 together with the MOTIF-RACK XS

with a variety of convenient functions. For details, refer to the

section “Integration Between the MOTIF-RACK XS and Cubase”

(page 24).

n The capabilities and uses of connecting the MOTIF-RACK XS to a

computer via an IEEE1394 cable in a peer-to-peer arrangement is referred

to as “mLAN” in this Owner’s Manual and the MOTIF-RACK XS instrument.

For details and the latest information on mLAN, refer to the following URL:

http://www.yamahasynth.com/

IEEE1394 terminal

mLAN

terminal

IEEE1394 cable

Rear panel of the

MOTIF-RACK XS

CAUTION

Plug in the jack with the correct orientation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info