Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 30 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Voice Mode

MOTIF-RACK XS Owner’s Manual

Basic Structure

Reference

Voice

Multi Utility

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

n Operating the knobs may have little to no effect on certain voices.

n The Multi mode features the same parameter-to-knob assignments as the Voice mode.

Functions of Knobs 1 – 5

Knob 1 Knob 2

Knob 3 Knob 4

Knob 5

1 When the 1st lamp is turned on:

Moving Knobs 1 and 2 changes the Filter parameters on the Filter display (pages 68, 83, and 96).

Moving Knob 3 changes one of the FEG parameters on the EG display (pages 68 and 96). Moving

Knobs 4 and 5 changes two of the parameters on the Play Mode display (pages 65, 83 and 94).

Knob 1 CUTOFF

Raises or lowers the Filter Cutoff Frequency (pages 68 and 96) to adjust the tone brilliance.

Knob 2 RESONANCE

Raises or lowers the Resonance (pages 68 and 96) to boost the level of the signal in the area of the

cutoff frequency. By emphasizing the overtones in this area, this can produce a distinctive “peaky”

tone, making the sound brighter and harder.

Knob 3 FEG DEPTH (Filter EG Depth)

Raises or lowers the Filter EG Depth (pages 68 and 96) to change the range of the cutoff

frequency. When a Drum Voice is selected, this parameter cannot be set.

Knob 4 PORTAMENTO

Raises or lowers the Portamento Time (pages 65 and 95) to determine the pitch transition time or

the speed of the pitch change when Portamento is applied. If you continue turning the knob toward

the left, this parameter setting will turn “off” and set the “Porta Sw (Portamento Switch)” to “off.”

Knob 5 VOLUME

Sets the volume of the Voice (pages 65 and 94).

2 When the 2nd lamp is turned on:

Moving Knobs 1 – 4 changes the AEG parameters on the EG display (pages 68, 83, and 96).

Moving Knob 5 changes one of the parameters on the Play Mode display (pages 65, 83, and 94).

Knob 1 ATTACK (AEG Attack Time)

Increases or decreases the AEG Attack Time (pages 69 and 96) of the current Voice to adjust the

attack rate. Positive values increasingly slow down the attack rate, while negative values speed it

up.

Knob 2 DECAY (AEG Decay Time)

Increases or decreases the AEG Decay Time (pages 69 and 96) of the current Voice, controlling

how fast the volume falls from maximum attack level to the sustain level. The smaller the value, the

faster the decay.

Knob 3 SUSTAIN (AEG Sustain Level)

Increases or decreases the AEG Sustain Level (pages 69 and 96) at which the volume will

continue while a key is held, after the initial attack and decay. When a Drum Voice is selected, this

parameter cannot be set.

Knob 4 RELEASE (AEG Release Time)

Increases or decreases the AEG Release Time (pages 69 and 96) of the sound, controlling the

time that the volume falls from the sustain level to zero when a Note Off message is received. When

a Drum Voice is selected, this parameter cannot be set.

Knob 5 PAN

Adjusts the stereo pan position of the current Voice (pages 65 and 94).

3 When the 3rd lamp is turned on:

Moving Knobs 1 – 5 changes the parameters on the 3 Band EQ display (pages 71 and 83)/ Part

EQ display (page 96).

Knob 1 EQ LOW (EQ Low Gain)

Increases or decreases the EQ Low Gain (pages 71 and 96) to change the sound.

Knob 2 EQ MID F (EQ Middle Frequency)

Increases or decreases the EQ Middle Frequency (pages 71 and 96) around which the band is

adjusted via Knob 3 (EQ MID).

Knob 3 EQ MID (EQ Middle Gain)

Increases or decreases the EQ Middle Gain (pages 71 and 96) to change the current Voice.

Knob 4 EQ MID Q (EQ Middle Q)

Increases or decreases the EQ Middle Q (pages 71 and 97) to change the width of the band over

which you can adjust the gain via Knob 3 (EQ Middle Gain). Turning Knob 4 clockwise increases

the Q value to reduce the band width. Turning Knob 4 counter-clockwise decreases the Q value to

widen the band width.

Knob 5 EQ HIGH (EQ High Gain)

Increases or decreases the EQ High Gain (pages 71 and 96) to change the current Voice.

4 When the 4th lamp is turned on:

Moving Knobs 1 and 2 changes parameters on the Effect display (pages 72 and 83)/ Fx Send

display (page 97). Moving Knobs 3 and 4 changes parameters on the Control display (pages 71,

83, and 93). Moving Knob 5 changes one of the parameters on the Arp Edit display (page 66) or

Arpeggio display (page 91).

Knob 1 CHORUS (Chorus Send)

Adjusts the Chorus Send Level (pages 72 and 83).

Knob 2 REVERB (Reverb Send)

Adjusts the Reverb Send Level (pages 72 and 83).

Knob 3 ASSIGN 1 (Assign 1 value)

A variety of functions can be assigned to these Knobs. Turning the Knob can edit the value of the

function assigned to the Knob as offset. You can conﬁrm the functions currently assigned to these

Knobs in the Control display (pages 71 and 93) in the Voice Common Edit / Multi Common Edit.

Knob 4 ASSIGN 2 (Assign 2 value)

Knob 5 TEMPO (Arpeggio Tempo)

Adjusts the tempo for the Arpeggio playback (pages 66 and 91).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info