Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 57 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Controller Block

MOTIF-RACK XS Owner’s Manual

Basic Structure

Voice

MultiUtility

Reference

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

This block generates the MIDI events then transmits them to the tone generator block.

On synthesizers such as the MOTIF XS, this block consists of the keyboard, Pitch Bend and Modulation Wheels, Ribbon Controller,

Knobs, Sliders and panel buttons. On the MOTIF-RACK XS, this block consists of only the ﬁve knobs and panel buttons. Controlling the

knobs while playing the external MIDI keyboard adjusts the Voice parameters such as tonal characteristics and volume in real time.

For details on using knobs, see page 29 in the Quick Guide section.

This block applies effects to the output of the tone generator block, and audio input block, processing and enhancing the sound.

Effects are applied in the ﬁnal stages of editing, letting you change the sound of the created Voice as desired.

Effect structure

System Effects are applied to the overall sound. With System

Effects, the sound of each Part is sent to the effect according to

the effect Send Level for each Part. The processed sound

(referred to as “wet”) is sent back to the mixer, according to the

Return Level, and output—after being mixed with the

unprocessed “dry” sound. This arrangement lets you prepare an

optimum balance of the effect sound and the original sound of

the Parts.

Insertion Effects can be applied individually to each Part.

Insertion Effects are mainly used to directly process a single

Part, or Voice. A insertion effect has two units, A and B. Different

effect types can be set for each unit (Insertion Effects A and B).

The Insertion Effect can be speciﬁed in the effect parameter

display of Voice Edit (page 72). This instrument features eight

sets of Insertion Effects (each set has two units, A and B). They

can be applied to a maximum of eight Parts in the Multi mode.

This block applies effects to the ﬁnal stereo output signal of the

entire sound.

The Element EQ is applied to each element of the Normal Voice

and each key of the Drum Voice. You can specify which shape is

used among ﬁve types, such as shelving and peaking. The

Element EQ parameters can be set only on the MOTIF-RACK XS

Editor.

The Part EQ, the 3-band parametric EQ, is applied to each part

of the Multi. The high band and low band are the shelving type.

The middle band is the peaking type. The Common EQ

parameters offset the settings of the Part EQ parameters.

Master EQ is applied to the ﬁnal (post-effect), overall sound of

the instrument. In this EQ, all ﬁve bands can be set to peaking,

or the lowest and highest bands can also be set to shelving.

Controller Block

Effect Block

System Effects—Reverb and Chorus

Insertion Effect

Master Effect

Element EQ

Common EQ/Part EQ

Master EQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info