Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 65 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Voice Mode

MOTIF-RACK XS Owner’s Manual

Basic Structure

Voice

MultiUtility

Reference

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

1 Name

Name Enters the desired name for the Voice. When you move the cursor to “Name,” pressing the [ENTER]

button calls up the Naming dialog, allowing you to enter the desired name. The Voice name can

contain up to 20 characters. For detailed instructions on naming, refer to page 47 in the Quick

Guide.

Main 1 Ctgry (Main Category 1) Determines the two Main Categories and their Sub Categories to which the Voice belongs

respectively. “Category” can be used as a keyword representing the characteristics of the Voice.

The appropriate setting makes it easy to ﬁnd the desired Voice from a variety of Voices. There are 16

Main Categories which indicate types of instruments. There are up to ﬁve Sub Categories for each

Main Category, indicating more detailed types of instruments.

Settings: Refer to the Category List on page 87.

Sub 1 Ctgry (Sub Category 1)

Main 2 Ctgry (Main Category 2)

Sub 2 Ctgry (Sub Category 2)

2 Play Mode

Volume Determines the output level of the Voice. Set this parameter to adjust the balance between the

current Voice and other Voices. This parameter can be changed directly via the Knob.

Settings: 0 – 127

Pan Determines the stereo pan position of the Voice. This parameter can be changed directly via the

Knob.

Settings: L63 (far left) – C (center) – R63 (far right)

n Note that this Part Pan parameter may have little or no audible effect if the Pan for a speciﬁc Element is set to the

left position and the Pan for another Element is set to the right position.

Note Shift Determines the transpose setting for the amount (in semitones) by which the pitch is raised or

lowered.

Settings: 24 – +0 – +24

PB Range Upper

(Pitch Bend Range Upper)

Determines the maximum Pitch Bend range in semitones. Setting the Upper parameter to +12 would

result in a maximum pitch rise of one octave when the Pitch Bend wheel is moved upwards. On the

other hand, a Lower setting of -12 would result in the pitch being lowered up to a maximum of one

octave (12 semitones) when the Pitch Bend wheel is moved downwards.

Settings: -48 semi – +0 semi – +24 semi

PB Range Lower

(Pitch Bend Range Lower)

Mono/Poly Determines the playback method of the Voice: monophonic (single Note Only) or polyphonic

(multiple notes).

Settings: mono, poly

mono ................................. When set to “mono,” the selected Voice is played back monophonically (only a single note is

played back simultaneously). For many instrument sounds (such as bass and synth lead), this

allows a more natural and smooth sounding legato performance than when this parameter is set

to “poly.”

poly.................................... When set to “poly,” the selected Voice is played back polyphonically (multiple notes can be

played back simultaneously or a chord is played back).

Key Assign Mode This is useful when two or more instances of the same note are received nearly simultaneously, or

without a corresponding Note Off message.

Settings: single, multi

single................................. When this is set to “single” and double playback of the same note are transmitted to the internal

tone generator, the ﬁrst note will be stopped then the next note will be sounded.

multi................................... When this is set to “multi” and double playback of the same note are transmitted to the internal

tone generator, all the notes are sounded simultaneously.

Porta Sw

(Portamento Switch)

Determines whether Portamento is applied to the current Voice or not. This parameter can be

changed directly via the Knob.

Settings: off, on

Porta Time

(Portamento Time)

Determines the pitch transition time when Portamento is applied. The effect of the parameter differs

depending on the settings of the “Portamento Time Mode.” Higher values result in a longer pitch

change time, or a slow speed. This parameter can be changed directly via the Knob.

Settings: 0 – 127

Porta Mode

(Portamento Mode)

Determines how Portamento is applied to your keyboard performance.

Settings: ﬁngered, fulltime

ﬁngered

..............................Portamento is only applied when you play legato (playing the next note before releasing the

previous one).

fulltime ............................... Portamento is applied to all notes.

Porta Time Mode

(Portamento Time Mode)

Determines how the pitch changes in time.

Settings: rate1, time1, rate2, time2

rate1 .................................. Pitch changes at the speciﬁed rate.

time1.................................. Pitch changes in the speciﬁed time.

rate2 ................................. Pitch changes at the speciﬁed rate within a octave.

time2.................................. Pitch changes in the speciﬁed time within a octave.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info